Canon Booklet Finisher-D1 Service Manual page 248

Hide thumbs Also See for Booklet Finisher-D1:
Table of Contents

Advertisement

5
Adjustment > Auxiliary Adjustment > Adjusting Staple Position (1-stapling at the rear) > Procedure
3) Pressing switch SW383 [1] or SW384 [2] determines adjustment level.
By pressing SW383 once, the LED [3] indicates "-1" and the stapling position at the rear
shifts to the rear . In the same way, by pressing SW384 once, the LED [3] indicates "+1"
and the stapling position at the rear shifts to the front.
• Adjustment range: +20 to -20 (shifting amount per unit: 0.5mm)
SW382
SW381
SW383
SW384 SW385
(-)
(+)
[1]
4) Press switch SW385 [1] to move the stapler to the rear.
SW382
SW381
SW383
SW384 SW385
(-)
(+)
5
Adjustment > Auxiliary Adjustment > Adjusting Staple Position (1-stapling at the rear) > Procedure
[3]
ENTER
[2]
F-5-164
ENTER
[1]
F-5-165
5) Place A4 paper [1] on the intermediate process tray. (Be sure to push in the paper to the
rear side of the process tray)
Then, press switch SW383 to execute stapling.
5-72
[1]
F-5-166
5-72

Advertisement

Table of Contents
loading

This manual is also suitable for:

Staple finisher-d1

Table of Contents