Removing The Pushing Plate - Canon Staple Finisher-AA1 Service Manual

4x
26. Spread the front frame to remove the folding roller[1]
[2].
■ Handling after parts replacement
1. Adjustment after the folding roller exchange.
"Phase Alignment When Installing the Paper Folding
Roller" on page 179

Removing the pushing plate.

■ Preparation
1. Pull out the saddle unit (service position).
" Pulling Out the Saddle Unit (Service Position)" on page
131
2. Remove the lower front cover.
" Removing the Lower Front Cover" on page 94
3. Remove the saddle unit
" Removing the Saddle Unit" on page 105
4. Remove the pushing unit
"Removing the pushing plate." on page 141
■ Procedure
1. Removing the pushing plate[1].
• 1 pushing plate guide[2]
• 3 screws [3]
[2]
[1]
CAUTION:
When removing the pushing plate, be sure to check the
fixation position(scale).
3x
■ Handling after parts replacement
1. If you remove or replace the pushing unit, perform
phase adjustment of folding roller.
"Phase Alignment When Installing the Paper Folding
Roller" on page 179
141
4. Parts Replacement and Cleaning
[3]
[3]
[3]
[1]
[2]