Using The Machine; Removing Paper Jams From The Finisher Unit - Canon FINISHER-C1 Service Manual

III. Using the Machine
A. Removing Paper Jams
from the Finisher Unit
If the copier indicates the finisher paper jam
message, perform the following to remove the
jam.
1) Holding the finisher unit as shown, move
it to detach it from the copier.
Figure 1-301
2) Remove any jam visible from the outside.
Figure 1-302
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
3) Shift up the interrupt tray, open the upper
cover, and check the inside of the finisher.
Figure 1-303
4) Lift the buffer roller cover, and remove the
jam.
Figure 1-304
5) Lift the buffer roller, and remove the jam.
Figure 1-305
1-9