Jeep J-10 Series 1982 Technical & Service Manual page 735

/USX
PROPELLER SHAFT 2E-11
Torque Specifications
Service Set-To Torques should be used when assembling components. Service In-Use Recheck Torques should be used for checking a pnvtlghtened Item.
USA (ft-Hw) ***«'* <N*m)
Service Service
Service In-Use Service In-Use
Set-To Recheck Set-To Recheck
Torque Torque Torque Torque
Pinion Yoke Nut: . . .
Model 30-44 Axle 210 200-220 285 271-298
Model 60 Axle 260 250-270 352 339-366
AMC-Jeep Axle Add 5 in-lbs. (0.56 N-m) torque measured at
disassemble. Refer to Pinion Seal and Yoke
Replacement, Chapter 2F- AMC-Jeep Axle.
Universal Joint Clamp Strap Bolt 15 13-18 20 18-24
All Torque values given in foot-pounds and newton-meters with dry fits unless otherwise specified.
80336
LUBE FITTING
ADAPTER TOOL
J-25512-2
Tools
J-24649-1
YOKE RUNOUT
GAUGE