Jeep Grand Cherokee SRT 2019 Owner's Manual

page of 656

/ 656
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Grand Cherokee SRT

OW N E R ' S M A N UA L

1 9 W K S R T- 1 2 6 - E N A - A A

Jeep is a registered trademark of FCA US LLC.

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the Grand Cherokee SRT 2019 and is the answer not in the manual?

Questions and answers

Summary of Contents for Jeep Grand Cherokee SRT 2019

Page 2: Table Of Contents
Table of Contents ..............3 INTRODUCTION .
Page 4: Introduction
INTRODUCTION • INTRODUCTION ........4 • ROLLOVER WARNING .......4 •...
Page 5: Introduction
cialists to acquaint you with the operation and NOTE: INTRODUCTION maintenance of your vehicle. It is supplemented After reviewing the Owner’s Information, it Dear Customer, congratulations on selecting by Warranty Information, and customer oriented should be stored in the vehicle for convenient your new vehicle.
Page 6: Important Notice
this Owner’s Manual will help assure safe and the attachment or installation of such parts, it enjoyable operation of your vehicle. cannot be implicitly assumed that the driving safety of your vehicle is unimpaired. Therefore, After you have read the Owner’s Manual, it neither experts nor official agencies are liable.
Page 7: Symbols
The detailed index at the back of this Owner’s Manual contains a complete listing of all sub- jects. Symbols Some vehicle components have colored labels whose symbols indicate precautions to be ob- served when using this component. Refer to “Warning Lights and Messages” in “Getting To Know Your Instrument Panel”...
Page 8: Graphical Table Of Contents
GRAPHICAL TABLE OF CONTENTS • FRONT VIEW ........8 •...
Page 9: Front View
FRONT VIEW Front View 1 — Hood/Engine Compartment 4 — Wheels/Tires 2 — Windshield 5 — Exterior Mirrors 3 — Headlights 6 — Exterior Door Handle...
Page 10: Rear View
REAR VIEW Rear View 1 — Taillight 2 — Rear Windshield Wiper 3 — Liftgate...
Page 11: Instrument Panel
INSTRUMENT PANEL Instrument Panel 1 — Instrument Cluster Display Controls 6 — Uconnect Radio 2 — Paddle Shifters 7 — Radio Controls 3 — Instrument Cluster 8 — Climate Controls 4 — Speed Controls 9 — Switch Panel 5 — Ignition Switch 10 —...
Page 12: Interior
INTERIOR Interior Features 1 — Door Locks 4 — Seats 2 — Window Switches 5 — Gear Selector 3 — Door Handles 6 — Cupholders...
Page 14: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE • KEYS .........17 •...
Page 15 • Keyless Enter-N-Go — Passive Entry ....26 • Locking The Doors With One Or More Doors Open... . .28 •...
Page 16 • Flash-To-Pass ........42 • Automatic Headlights — If Equipped .....42 •...
Page 17 • COMMANDVIEW SUNROOF WITH POWER SHADE — IF EQUIPPED . .57 • Opening Sunroof ....... . .57 •...
Page 18: Keys
KEYS To Unlock The Doors And Liftgate Push and release the unlock button on the key fob once to unlock the driver’s door or twice Key Fob within five seconds to unlock all doors and the Your vehicle uses a keyless ignition system. The liftgate.
Page 19 To Lock The Doors And Liftgate Push and release the lock button on the key fob to lock all doors and liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the signal. Refer to “Uconnect Settings” located in “Multimedia” for further programmable information.
Page 20: Ignition Switch
Skin oils may cause battery deterioration. If Duplication of key fobs may be performed at an NOTE: authorized dealer. This procedure consists of you touch a battery, clean it with rubbing If the ignition switch does not change with the programming a blank key fob to the vehicle alcohol.
Page 21: Vehicle On Message
Opening either front door will cancel this feature. WARNING! (Continued) The time for this feature is programmable. • Engine is not started. power windows, other controls, or move • Some electrical devices are available. the vehicle. WARNING! • Do not leave children or animals inside •...
Page 22: Electronic Steering Wheel Lock - If Equipped
The Remote Starting System also activates the How To Use Remote Start WARNING! (Continued) Climate Control, vented seats (if equipped) in • Push Remote Start button on the key fob • Do not leave children or animals inside temperatures above 80° F (26.7° C), and the twice within five seconds.
Page 23: Remote Start Abort Message
To Enter Remote Start Mode To Exit Remote Start Mode And WARNING! Push and release the Remote Start button on Drive The Vehicle • Do not start or run an engine in a closed the key fob twice within five seconds. The Before the end of 15-minute cycle, push and vehicle doors will lock, the turn signals will flash garage or confined area.
Page 24: Sentry Key
SENTRY KEY NOTE: CAUTION! Duplication of key fobs may be performed at an The Sentry Key Immobilizer system prevents The Sentry Key Immobilizer system is not authorized dealer. This procedure consists of unauthorized vehicle operation by disabling the compatible with some aftermarket remote programming a blank key fob to the vehicle engine.
Page 25: Vehicle Security Alarm - If Equipped
• For vehicles equipped with Keyless Entry, • The vehicle security alarm remains armed engine. Either of these conditions will result in the engine being shut off after two seconds. make sure the vehicle’s keyless ignition during power liftgate entry. Pushing the lift- system is OFF.
Page 26: Security System Manual Override
Security System Manual Override WARNING! The vehicle security alarm will not arm if you • For personal security and safety in the lock the doors using the manual door lock event of a collision, lock the vehicle doors plunger. before you drive as well as when you park Tamper Alert and leave the vehicle.
Page 27: Keyless Enter-N-Go - Passive Entry
• If the vehicle is unlocked by Passive Entry Keyless Enter-N-Go — Passive Entry To Unlock From The Passenger Side and no door is opened within 60 seconds, the The Passive Entry system is an enhancement to With a valid Passive Entry key fob within 5 ft vehicle will re-lock and if equipped will arm the vehicle’s key fob and a feature of Keyless (1.5 m) of the passenger door handle, grab the...
Page 28 • When the vehicle security alarm is in pre-arm To Lock The Vehicle’s Doors And Liftgate or armed status and the liftgate transitions With one of the vehicle’s Passive Entry key fob from open to closed. within 5 ft (1.5 m) of the driver or passenger front •...
Page 29: Locking The Doors With One Or More Doors Open
To Unlock/Enter The Liftgate Locking The Doors With One Or Child-Protection Door Lock System More Doors Open — Rear Doors The liftgate passive entry unlock feature is built If the door lock switch is pushed while the To provide a safer environment for small chil- into the electronic liftgate release.
Page 30: Seats
• After disengaging the Child-Protection Door SEATS Reclining Rear Seat Lock system, always test the door from the To recline the seatback, lift the lever located on Seats are a part of the Occupant Restraint inside to make certain it is in the desired the outboard side of the seat, lean back and System of the vehicle.
Page 31: Power Adjustment (Front Seats)
To Lower Rear Seat 2. Fold the rear seat completely forward. WARNING! Either side of the rear seat can be lowered to • Be certain that the seatback is securely allow for extended cargo space and still main- locked into position. If the seatback is not tain some rear seating room.
Page 32: Driver Memory Seat - If Equipped
cushion will move in the direction of the switch. CAUTION! (Continued) Release the switch when the desired position damage to the seat controls. Seat travel may has been reached. become limited if movement is stopped by an Reclining The Seatback obstruction in the seat’s path.
Page 33 mirrors, and power tilt and telescopic steering Programming The Memory Feature NOTE: column (if equipped) and a set of desired radio Before programming your key fobs you must NOTE: station presets. Your key fob can also be pro- select the “Memory Linked To Fob” feature To create a new memory profile, perform the grammed to recall the same positions when the through the Uconnect system screen.
Page 34: Heated Seats - If Equipped
Memory Position Recall Easy Entry/Exit Seat Heated Seats — If Equipped This feature provides automatic driver seat po- On some models, the front and rear seats may NOTE: sitioning to enhance driver mobility when enter- be equipped with heaters located in the seat The vehicle must be in PARK to recall memory ing and exiting the vehicle.
Page 35 for LO. Turning the heating elements off will WARNING! return the user to the radio screen. • Persons who are unable to feel pain to the • Press the heated seat button once to turn skin because of advanced age, chronic the HI setting on.
Page 36: Front Ventilated Seats - If Equipped
• Press the ventilated seat button a second WARNING! (Continued) WARNING! (Continued) time to choose LO. • Head restraints should never be adjusted illness, diabetes, spinal cord injury, medi- • Press the ventilated seat button a third cation, exhaustion or other physical condi- while the vehicle is in motion.
Page 37: Adjustment - Rear Seats
head restraint, and push downward on the head WARNING! (Continued) restraint. • All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 38: Head Restraint Removal - Rear Seats
tion when the rear seat is raised. After returning WARNING! WARNING! either seat to its upright position, raise the head • A loose head restraint thrown forward in a restraint until it locks in place. The outboard • ALL the head restraints MUST be rein- collision or hard stop could cause serious head restraints are not removable.
Page 39: Heated Steering Wheel - If Equipped
Heated Steering Wheel — If WARNING! Equipped • Persons who are unable to feel pain to the The steering wheel contains a heating element skin because of advanced age, chronic that helps warm your hands in cold weather. The illness, diabetes, spinal cord injury, medi- heated steering wheel has only one temperature cation, exhaustion, or other physical condi- setting.
Page 40: Outside Mirrors
switch. To adjust a mirror, push the mirror select You can turn the feature on or off by pushing the WARNING! button at the base of the mirror. A light in the button for the mirror that you want to adjust. button will illuminate to indicate when the dim- Using the mirror control switch, push on any of Vehicles and other objects seen in an outside...
Page 41: Heated Mirrors - If Equipped
the mirrors will fold in, push the switch a second NOTE: Heated Mirrors — If Equipped time and the mirrors will return to the normal The Automatic Fold/Unfold Mirrors feature is not driving position. turned on when delivered from the factory. The These mirrors are heated to melt frost or ice.
Page 42: Illuminated Vanity Mirrors
To turn on the headlights, rotate the headlight Illuminated Vanity Mirrors NOTE: switch clockwise. When the headlight switch is To access an illuminated vanity mirror, flip down The sun visor blade can also be extended while on, the parking lights, taillights, license plate one of the visors.
Page 43: Multifunction Lever
toward you. This will cause the high beam Multifunction Lever Automatic High Beam — If Equipped headlights to turn on, and remain on, until the The multifunction lever is located on the left side The Automatic High Beam Headlamp Control lever is released.
Page 44: Adaptive Bi-Xenon High Intensity Discharge Headlights - If Equipped
Uconnect system screen. Refer to “Uconnect Headlight Delay on). Push the switch a third time, and the rear Settings” in “Multimedia” for further information. fog lights turn off (front fog stays on). Push the To aid in your exit, your vehicle is equipped with switch a fourth time, and the front fog turns off.
Page 45: Lane Change Assist - If Equipped
Lane Change Assist — If Equipped turned on and left on for eight minutes while the Courtesy Lights ignition is OFF, the exterior lights will automati- Tap the multifunction lever up or down once, The courtesy lights can be turned on by pushing cally turn off.
Page 46: Windshield Wipers And Washers
backlit for night time visibility. To turn the lights Dimmer Controls off, push the switch a second time. The lights will The brightness of the instrument panel lighting also turn on when the unlock button on the can be regulated by rotating the dimmer control remote keyless entry key fob is pushed.
Page 47 Windshield Washer Operation CAUTION! WARNING! To use the washer, push on the end of the lever (toward the steering wheel) and hold while spray Always remove any buildup of snow that Sudden loss of visibility through the wind- is desired. If the lever is pushed while in the prevents the windshield wiper blades from shield could lead to a collision.
Page 48: Rain Sensing Wipers - If Equipped
• Use of Rain-X or products containing wax or Rain Sensing Wipers — If Equipped Rear Window Wiper/Washer silicone reduce Rain Sensing This feature senses rain or snowfall on the The rear wiper/washer controls are located on performance. windshield and automatically activates the wip- the multifunction lever on the left side of the ers for the driver.
Page 49: Headlight Washers - If Equipped
OFF position and the wipers will cycle several CLIMATE CONTROLS times before returning to the parked position. The Climate Control System allows you to regu- late the temperature, air flow, and direction of air NOTE: circulating throughout the vehicle. The controls As a protective measure, the pump will stop if are located on the touchscreen (if equipped) the switch is held for more than 20 seconds.
Page 50 Uconnect 4C/4C NAV With 8.4–inch Display Automatic Climate Controls...
Page 51 Control Descriptions Icon Description MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off. NOTE: The MAX A/C setting is only available on the touchscreen.
Page 52 Icon Description Front Defrost Button The Front Defrost button changes the current airflow setting to Defrost mode. The indicator illuminates when this feature is on. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase.
Page 53 Icon Description Faceplate Knob Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touch- screen.
Page 54: Climate Control Functions
Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy condi- tions that require extra heat to the windshield.
Page 55: Automatic Temperature Control (Atc)
MAX A/C displayed, the system will achieve and auto- Operating Tips matically maintain that comfort level. MAX A/C sets the control for maximum cooling NOTE: performance. 3. When the system is set up for your comfort Refer to the chart at the end of this section for level, it is not necessary to change the set- suggested control settings for various weather Press and release to toggle between MAX A/C...
Page 56: Windows
Recirculation mode without A/C for long periods, Cabin Air Filter WINDOWS as fogging may occur. The climate control system filters out dust and pollen from the air. Contact an authorized dealer Power Window Controls to service your cabin air filter, and to have it CAUTION! The window controls on the driver’s door control replaced when needed.
Page 57: Auto-Down Feature
this feature. The time is programmable. Refer to Auto-Up Feature With Anti-Pinch Reset Auto-Up “Uconnect Settings” in “Multimedia” for further Should the Auto-Up feature stop working, the Protection window probably needs to be reset. To reset information. Lift the window switch up, for a short period of Auto-Up: time, and release and the window will go up automatically.
Page 58: Wind Buffeting
The power shade switch is located to the right WARNING! (Continued) between the sun visors on the overhead con- • In a collision, there is a greater risk of being sole. thrown from a vehicle with an open sun- roof. You could also be seriously injured or killed.
Page 59: Closing Sunroof
Manual Mode Wind Buffeting Manual Open Wind buffeting can be described as the percep- To open the sunroof, push and hold the switch Push and hold the sunshade switch rearward, tion of pressure on the ears or a helicopter-type rearward. The sunroof will stop automatically at the sunshade will open to the half open position sound in the ears.
Page 60: Pinch Protect Feature
Pinch Protect Feature HOOD 2. Reach under the hood, move safety latch to This feature will detect an obstruction in the the left and lift the hood. opening of the sunroof during Express Close To Open The Hood operation. If an obstruction in the path of the To open the hood, two latches must be released.
Page 61: Liftgate
NOTE: CAUTION! WARNING! If “Unlock All Doors 1st Press” is programmed in Driving with the liftgate open can allow poi- the instrument cluster display, all doors will To prevent possible damage, do not slam the sonous exhaust gases into your vehicle. You unlock when you push the electronic release on hood to close it.
Page 62: Power Liftgate - If Equipped
• If the liftgate is not fully open, push the liftgate Power Liftgate — If Equipped gency liftgate latch release can be accessed through a snap-in cover located on the liftgate button on the key fob twice to operate the trim panel.
Page 63: Cargo Area Features
Cargo Area Features 1. Grasp the cover at the center handle. Pull it over the cargo area. Cargo Storage Bins There are up to four removable storage bins 2. Insert the pins on the ends of the cover into located in the rear cargo area. There are two the slots in the pillar trim cover.
Page 64: Internal Equipment
Rear Cargo Tie-Downs INTERNAL EQUIPMENT WARNING! (Continued) The rear cargo tie-downs, located on the cargo The weight and position of cargo and pas- area floor, should be used to safely secure loads Storage sengers can change the vehicle center of when the vehicle is moving.
Page 65 To open the glove compartment, pull the release Door Storage To open the upper storage compartment, pull handle. Large storage areas are built into the door upward on the small latch located on the lid. panels for easy access. Opened Glove Compartment Storage Compartment Latches Door Panel Storage Lift upward on the larger of the latches to access...
Page 66: Cupholders
There are two cupholders for the rear seat Your vehicle may have an optional CD or DVD Overhead Console player located in the center console. The overhead console contains courtesy/ passengers located in the fold-down center arm- reading lights and storage for sunglasses. rest.
Page 67 NOTE: CAUTION! The rear power outlet can be switched from Power outlets are designed for accessory switched “ignition” only to constant “battery” plugs only. Do not insert any other object in powered all the time. See your local authorized the power outlets as this will damage the dealer for details.
Page 68: Sunglasses Bin Door
Sunglasses Bin Door CAUTION! At the front of the console, a compartment is • Many accessories that can be plugged in provided for storing a pair of sunglasses. The draw power from the vehicle’s battery, storage compartment access is a “push/push” even when not in use (i.e., cellular phones, design.
Page 70: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL • INSTRUMENT CLUSTER ......70 • Instrument Cluster Descriptions ......70 •...
Page 71: Instrument Cluster
INSTRUMENT CLUSTER SRT Instrument Cluster Instrument Cluster Descriptions 2. Tachometer 3. Temperature Gauge • Indicates the engine speed in revolutions • The temperature gauge shows engine 1. Speedometer per minute (RPM x 1000). coolant temperature. Any reading within • Indicates vehicle speed. the normal range indicates that the engine cooling system is operating satisfactorily.
Page 72: Instrument Cluster Display
• The gauge pointer will likely indicate a 5. Instrument Cluster Display Instrument Cluster Display Location higher temperature when driving in hot • The instrument cluster display features a And Controls weather or up mountain grades. It should The instrument cluster display is located in the driver-interactive display.
Page 73: Oil Change Reset - If Equipped
• Right Arrow Button porarily, push and release the OK button. To The system allows the driver to select informa- tion by pushing the following buttons mounted reset the oil change indicator system (after Push and release the right arrow on the steering wheel: performing the scheduled maintenance), refer to button to access the information...
Page 74: Instrument Cluster Display Messages
• Service Electronic Braking System • Service Air Bag Warning Light Instrument Cluster Display Messages • Engine Temperature Hot • Door Open Includes the following, but not limited to: • Lights On • Doors Open • Front Seatbelts Unbuckled • Right Front Turn Signal Light Out •...
Page 75 tween large and small speedometer display. Terrain — If Equipped The Performance Features include the follow- Push and release the OK button to toggle units Push and release the up or down arrow button ing: (mph or km/h) of the speedometer. until the Terrain icon/title is highlighted in the •...
Page 76 • Braking Distance Adaptive Cruise Control Ready LaneSense — If Equipped – Distance When ACC is activated but the vehicle speed The instrument cluster display displays the cur- – From Speed setting has not been selected, the display will rent LaneSense system settings. The informa- read “Adaptive Cruise Control Ready.”...
Page 77 • Average – The display shows the average Pushing the left or right arrow button will allow Upper Right fuel economy (MPG, L/100 km, or km/L) you to scroll through the stored messages. • None since the last reset. Screen Setup •...
Page 78: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
• Trip Info (show/hide) yellow and will flash, and a pop up message of These messages indicate the vehicle battery “Speed Warning Exceeded” will display. has a low state of charge and continues to lose • Audio (show/hide) electrical charge at a rate that the charging NOTE: •...
Page 79: Trip Computer
• Turning on all possible vehicle electrical loads • Shows instantaneous fuel consumption for – Check what may be plugged in to power (e.g. HVAC to max settings, exterior and outlets +12V, 150W, USB ports Trip A since the last reset. interior lights, overloaded power outlets –...
Page 80: Red Warning Lights
refer to the information in this chapter in the Brake System (ABS) / Electronic Stability Con- Vehicles equipped with the Anti-Lock Brake Sys- event of a failure indication. All active telltales trol (ESC) system. In this case, the light will tem (ABS) are also equipped with Electronic will display first if applicable.
Page 81 — Door Open Warning Light running, your vehicle will usually be drivable; Refer to “If Your Engine Overheats” in “In Case This indicator will illuminate when a door is however, see an authorized dealer for service Of Emergency” for further information. ajar/open and not fully closed.
Page 82: Yellow Warning Lights
— Seat Belt Reminder Warning Light ignition is placed in the ON/RUN or ACC/ON/ WARNING! This warning light indicates when the driver or RUN position and may stay on for as long as If you continue operating the vehicle when passenger seat belt is unbuckled.
Page 83 engine running. If the “ESC Indicator Light” — Loose Fuel Filler Cap Warning Light typical driving styles. In most situations, the comes on continuously with the engine running, — If Equipped vehicle will drive normally and will not require a malfunction has been detected in the ESC This warning light will illuminate when the fuel towing.
Page 84 — Service Forward Collision Warning ard or tire inflation pressure label. (If your ve- the malfunction exists. When the malfunction (FCW) Light — If Equipped hicle has tires of a different size than the size indicator is illuminated, the system may not be This warning light will illuminate to indicate a indicated on the vehicle placard or tire inflation able to detect or signal low tire pressure as...
Page 85: Yellow Indicator Lights
Yellow Indicator Lights — Front Fog Indicator Light — If Refer to “Selec-Track” in “Starting And Operat- Equipped ing” for further information. — Forward Collision Warning Off This indicator light will illuminate when the front — Turn Signal Indicator Lights Indicator Light —...
Page 86: Blue Indicator Lights
— LaneSense Indicator Light — If — Cruise Control Ready Indicator Light properly, your vehicle will provide excellent per- Equipped This light will turn on when the speed control has formance and fuel economy, as well as engine When the LaneSense system is ON, but not been turned on, but not set.
Page 87: Onboard Diagnostic System (Obd Ii) Cybersecurity
Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is required to have an Onboard Diagnostic system (OBD II) and a connection port to allow access to information related to the performance of your emissions controls. Autho- rized service technicians may need to access this information to assist with the diagnosis and service of your vehicle and emissions system.
Page 88: Safety
SAFETY • SAFETY FEATURES ....... .88 • Anti-Lock Brake System (ABS) ......88 •...
Page 89: Safety Features
SAFETY FEATURES ABS is designed to function with the OEM tires. WARNING! Modification may result in degraded ABS perfor- • The ABS contains sophisticated electronic mance. Anti-Lock Brake System (ABS) equipment that may be susceptible to in- The Anti-Lock Brake System (ABS) provides Anti-Lock Brake Warning Light terference caused by improperly installed increased vehicle stability and brake perfor-...
Page 90 gether to enhance both vehicle stability and reduce braking distances. The BAS comple- system will release brake pressure and the control in various driving conditions. ments the anti-lock brake system (ABS). Apply- vehicle will roll down the hill as normal. ing the brakes very quickly results in the best Your vehicle may also be equipped with Trailer The following conditions must be met in order...
Page 91 5. Rotate the steering wheel slightly more than WARNING! (Continued) WARNING! (Continued) one-half turn to the left. sibility to be attentive to distance to other the trailer on a hill when the brake pedal is 6. Push the “ESC Off” button located in the vehicles, people, and objects, and most im- released.
Page 92 Electronic Stability Control (ESC) WARNING! WARNING! (Continued) This system enhances directional control and • Electronic Stability Control (ESC) cannot nance that reduces the effectiveness of the stability of the vehicle under various driving prevent the natural laws of physics from ESC system can increase the risk of loss of conditions.
Page 93 on again, momentarily push the “ESC Off” sound, the “ESC Off Indicator Light” will illumi- WARNING! (Continued) switch and the “ESC Off Indicator Light” will turn nate, and the “ESC OFF” message will display crease the traction afforded by prevailing off.
Page 94 tion, ease up on the accelerator and apply as wheel lift will occur. ERM can only reduce the NOTE: little throttle as possible. Be sure to adapt your chance of wheel lift occurring during severe or TSC cannot stop all trailers from swaying. Al- speed and driving to the prevailing road condi- evasive driving maneuvers;...
Page 95: Auxiliary Driving Systems
vehicle. The BSM system monitors the detection Rain Brake Support (RBS) AUXILIARY DRIVING SYSTEMS Rain Brake Support may improve braking per- zones on both sides of the vehicle when the formance in wet conditions. It will periodically vehicle speed reaches approximately 6 mph Blind Spot Monitoring (BSM) —...
Page 96 The BSM system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary. The BSM system will issue an alert during these types of zone entries. Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle.
Page 97 Overtaking/Passing Opposing Traffic RCP Detection Zones The BSM system is designed not to issue an RCP monitors the rear detection zones on both WARNING! alert on stationary objects such as guardrails, sides of the vehicle, for objects that are moving posts, walls, foliage, berms, etc.
Page 98: Forward Collision Warning (Fcw) With Mitigation
Blind Spot Alert Lights/Chime Forward Collision Warning (FCW) WARNING! With Mitigation When operating in Blind Spot Alert Lights/Chime Rear Cross Path Detection (RCP) is not a The Forward Collision Warning (FCW) with Miti- mode, the BSM system will provide a visual alert back up aid system.
Page 99 mum or partial braking to mitigate the potential the Active Braking portion of FCW will be collision with the vehicle in front using audible/ forward collision. If the Forward Collision Warn- deactivated until the next ignition cycle. visual warning when the latter is at a farther ing with Mitigation event stops the vehicle com- distance than "Medium"...
Page 100: Tire Pressure Monitor System (Tpms)
• FCW may not react to irrelevant objects such Tire Pressure Monitor System crease as the vehicle is driven - this is normal as overhead objects, ground reflections, ob- and there should be no adjustment for this (TPMS) jects not in the path of the vehicle, stationary increased pressure.
Page 101 • The TPMS is not a substitute for proper tire temperature is 68°F (20°C) and the measured CAUTION! (Continued) tire pressure is 28 psi (193 kPa), a temperature maintenance, and it is the driver’s responsi- • Using aftermarket tire sealants may cause drop to 20°F (-7°C) will decrease the tire pres- bility to maintain correct tire pressure using the Tire Pressure Monitoring System...
Page 102 The Tire Pressure Monitor System (TPMS) con- Service TPM System Warning sists of the following components: The Tire Pressure Monitoring System Warning Light will flash on and off for 75 seconds, and • Receiver Module remain on solid when a system fault is detected. •...
Page 103: Occupant Restraint Systems
below the low-pressure warning limit, upon the 20 minutes above 15 mph (24 km/h) in order for will display the “SERVICE TPM SYSTEM” mes- next ignition switch cycle, the Tire Pressure the TPMS to receive this information. sage and then display pressure values in place Monitoring System Warning Light will remain on, of the dashes.
Page 104: Seat Belt Systems
Here are some simple steps you can take to 4. Never allow children to slide the shoulder WARNING! (Continued) minimize the risk of harm from a deploying air belt behind them or under their arm. • Never install a rear-facing child restraint in bag: 5.
Page 105 Enhanced Seat Belt Use Reminder System seat is unoccupied). The BeltAlert warning se- NOTE: (BeltAlert) quence starts by blinking the Seat Belt Re- If BeltAlert has been deactivated and the driver minder Light and sounding an intermittent or outboard front seat passenger (if equipped Driver and Passenger BeltAlert (if equipped) chime.
Page 106 WARNING! (Continued) WARNING! (Continued) WARNING! (Continued) • In a collision, you and your passengers can • Two people should never be belted into a • A seat belt that is buckled into the wrong suffer much greater injuries if you are not single seat belt.
Page 107 if it is too tight, tilt the latch plate and pull on WARNING! (Continued) the lap belt. A snug seat belt reduces the risk • A frayed or torn seat belt could rip apart in of sliding under the seat belt in a collision. a collision and leave you with no protec- tion.
Page 108 2. At about 6 to 12 inches (15 to 30 cm) above As a guide, if you are shorter than average, you WARNING! (Continued) will prefer the shoulder belt anchorage in a lower the latch plate, grasp and twist the seat belt •...
Page 109 Position the lap belt snug and low below the Switchable Automatic Locking Retractors comfortably wrap around the occupant’s mid- abdomen and across the strong bones of the (ALR) — (If Equipped) section. Slide the latch plate into the buckle until hips.
Page 110 NOTE: How To Engage The Automatic Locking WARNING! (Continued) Mode The Active Head Restraints (AHR) may or may • Do not use the Automatic Locking Mode to not deploy in the event of a front or side impact. 1. Buckle the combination lap and shoulder restrain occupants who are wearing the However, if during a front impact, a secondary belt.
Page 111: Supplemental Restraint Systems (Srs)
Resetting Active Head Restraints (AHR) Supplemental Restraint Systems WARNING! (Continued) (SRS) seat until the head restraints are placed in Some of the safety features described in this their proper positions in order to minimize section may be standard equipment on some the risk of neck injury in the event of a models, or may be optional equipment on oth- collision.
Page 112 • The Air Bag Warning Light does not come on Air Bag Warning Light Redundant Air Bag Warning Light The ORC monitors the readiness of during the four to eight seconds when the If a fault with the Air Bag Warning the electronic parts of the air bag ignition switch is first in the ON/RUN position.
Page 113 ger seat belt is buckled. The seat belt buckle WARNING! (Continued) switch may adjust the inflation rate of the Ad- • Never install a rear-facing child restraint in vanced Front Air Bags. the front seat of a vehicle. Only use a rear-facing child restraint in the rear seat.
Page 114 Front Air Bag Operation Knee Impact Bolsters front seats. The SABs are marked with “SRS Front Air Bags are designed to provide addi- The Knee Impact Bolsters help protect the AIRBAG” or “AIRBAG” on a label or on the seat tional protection by supplementing the seat knees of the driver and front passenger, and trim on the outboard side of the seats.
Page 115 SABICs (if equipped with SABICs) may help WARNING! WARNING! (Continued) reduce the risk of head and other injuries to front • In order for the SABICs to work as in- Do not use accessory seat covers or place and rear seat outboard occupants in certain side objects between you and the Side Air Bags;...
Page 116 angles, or some side collisions that do not The Side Air Bags will not deploy in all rollover WARNING! impact the area of the passenger compartment. events. The rollover sensing system determines • Side Air Bags need room to inflate. Do not The Side Air Bags may deploy during angled or if a rollover event may be in progress and lean against the door or window.
Page 117 • Front and Side Impact Sensors irritation, rinse the area with cool water. For Enhanced Accident Response System nose or throat irritation, move to fresh air. If In the event of an impact, if the communication • Seat Belt Pretensioners the irritation continues, see your doctor.
Page 118 • Automatic transmission gear selector Maintaining Your Air Bag System WARNING! (Continued) • Horn accessories may be used. If it is necessary • Front wiper WARNING! to modify the air bag system for persons • Headlamp washer pump • Modifications to any part of the air bag with disabilities, contact an authorized system could cause it to fail when you need NOTE:...
Page 119: Child Restraints - Carrying Children Safely
These data can help provide a better under- Child Restraints — Carrying WARNING! standing of the circumstances in which crashes Children Safely • NEVER use a rearward facing child re- and injuries occur. straint on a seat protected by an ACTIVE NOTE: AIRBAG in front of it, DEATH or SERIOUS EDR data are recorded by your vehicle only if a...
Page 120 child seat Owner’s Manual to make sure you Group 0 And 0+ WARNING! (Continued) have the correct seat for your child. Carefully less of the severity of the collision. It is read and follow all the instructions and warnings advisable to always carry children in a child in the child restraint Owner’s Manual and on all restraint system on the rear seat, which is the the labels attached to the child restraint.
Page 121 Group 2 Group 3 WARNING! (Continued) injury to a child 12 years or younger, including a child in a rear-facing child restraint. • Never install a rear-facing child restraint in the front seat of a vehicle. Only use a rear-facing child restraint in the rear seat. If the vehicle does not have a rear seat, do not transport a rear-facing child restraint in that vehicle.
Page 122 Suitability Of Passenger Seats For WARNING! (Continued) WARNING! (Continued) Universal Child Restraint System Use • When your child restraint is not in use, restraint manufacturer’s directions exactly According to the European Directive 2000/3/EC, when installing an infant or child restraint. secure it in the vehicle with the seat belt or the suitability of each passenger seat position •...
Page 123 WARNING!
Page 124 Seat Belts For Older Children to the center of the vehicle, or use a booster The ISOFIX system has two lower anchorages Children over 1.50 m in height can wear seat seat to position the seat belt on the child cor- located at the back of the seat cushion where it belts instead of using child restraints.
Page 125 Locating The Tether Anchorages Center Seat ISOFIX There are tether strap anchorages WARNING! behind each rear seating position • Do not install a child restraint in the center located on the back of the seat. To position using the ISOFIX system. This access them, pull the carpeted floor position is not approved for any type of panel away from the seat back, this...
Page 126 3. Raise the armrest and attach the tether hook Suitability Of Passenger Seats For ISOFIX Child Restraint System Use to the strap located on the front of the arm The table below shows the various installation rest. possibilities for ISOFIX child restraint systems on seats fitted with ISOFIX anchorages in ac- cordance with European standard ECE 16.
Page 127 Rear Outboard Mass Group Size Class Fixture Front Passenger Rear Center Rt./Lt. ISO/R2 IUF/IUF ISO/R3 IUF/IUF ISO/F2 IUF/IUF I – 9 to 18 kg ISO/F2X IUF/IUF ISO/F3 IUF/IUF II – 15 to 25 kg III – 22 to 36 kg Key of letters used in the table above: Always follow the directions of the child so that you can more easily attach the con-...
Page 128 4. If the child restraint has a tether strap, con- WARNING! (Continued) nect it to the top tether anchorage. See the • Install the child restraint system when the section “Installing Child Restraints Using the vehicle is stationary. The ISOFIX child re- Top Tether Anchorage”...
Page 129 vehicle that the seat belts are not toys and that the head restraint and pass the tether strap WARNING! (Continued) they should not play with them. around the outboard side of the head re- use the visible cargo tie down hooks, lo- straint.
Page 130: Transporting Pets
Installing A Child Restraint With A 3. Slide the latch plate into the buckle until you Transporting Pets Switchable Automatic Locking Retractor hear a “click.” Air Bags deploying in the front seat could harm (ALR) your pet. An unrestrained pet will be thrown 4.
Page 131: Exhaust Gas
Exhaust Gas Whenever a change is noticed in the sound of Air Bag Warning Light the exhaust system, when exhaust fumes can The Air Bag warning light will turn on for four be detected inside the vehicle, or when the to eight seconds as a bulb check when the WARNING! underside or rear of the vehicle is damaged,...
Page 132: Periodic Safety Checks You Should Make Outside The Vehicle
WARNING! WARNING! (Continued) WARNING! (Continued) • ONLY use the driver’s side floor mat on the • If the vehicle carpet has been removed and An improperly attached, damaged, folded, or stacked floor mat, or damaged floor mat driver’s side floor area. To check for inter- re-installed, always properly attach carpet fasteners may cause your floor mat to inter- ference, with the vehicle properly parked...
Page 133 controls. Check turn signal and high beam indi- WARNING! cator lights on the instrument panel. To prevent SERIOUS INJURY or DEATH: Door Latches • ALWAYS remove any “Track-Use” equip- Check for proper closing, latching, and locking. ment before driving on public roads. Fluid Leaks •...
Page 134: Starting And Operating
STARTING AND OPERATING • STARTING THE ENGINE ......136 • Automatic Transmission ......136 •...
Page 135 • ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED ..153 • Adaptive Cruise Control (ACC) Operation....154 •...
Page 136 • PARKSENSE ACTIVE PARK ASSIST SYSTEM — IF EQUIPPED ..174 • Enabling And Disabling The ParkSense Active Park Assist System . .175 • Parallel Parking Space Assistance Operation/Display...176 •...
Page 137: Starting The Engine
STARTING THE ENGINE Normal Starting WARNING! (Continued) To Turn On The Engine Using The ENGINE Before starting your vehicle, adjust your seat, operate power windows, other controls, or START/STOP Button adjust the inside and outside mirrors, fasten move the vehicle. your seat belt, and if present, instruct all other 1.
Page 138 3. If the gear selector is not in PARK (with ENGINE START/STOP Button Functions — AutoPark With Driver’s Foot OFF The Brake Pedal (In AutoPark is a supplemental feature to assist in vehicle stopped) and the ENGINE START/ PARK Or NEUTRAL Position) placing the vehicle in PARK should the situa- STOP button is pushed once, the transmis- tions on the following pages occur.
Page 139: If Engine Fails To Start
• Driver’s door is ajar If the vehicle is not in PARK and the driver Additional customer warnings will be given turns off the engine, the vehicle may Au- when both of these conditions are met: • Brake Pedal is not depressed toPark.
Page 140: Cold Weather Operation (Below -22°F Or −30°C)
• Avoid aggressive braking. Cold Weather Operation (Below WARNING! –22°F Or −30°C) • Drive with the engine speed less than • Never pour fuel or other flammable liquid To ensure reliable starting at these tempera- 3,500 RPM. into the throttle body air inlet opening in an tures, use of an externally powered electric •...
Page 141: Parking Brake
NOTE: When the parking brake is applied with the WARNING! (Continued) ignition switch in the ON mode, the Brake Warn- Check engine oil with every refueling and add if • When leaving the vehicle, always remove ing Light in the instrument cluster will illuminate. necessary.
Page 142: Automatic Transmission
WARNING! (Continued) WARNING! (Continued) WARNING! (Continued) • Always fully apply the parking brake when leased. Make sure the transmission is in mode, the transmission is locked in PARK, leaving your vehicle, or it may roll and PARK before exiting the vehicle. securing the vehicle against unwanted •...
Page 143: Ignition Park Interlock
Brake/Transmission Shift Interlock When the Fuel Economy (ECO) Mode is en- CAUTION! abled, the vehicle control systems will change System Damage to the transmission may occur if the following: This vehicle is equipped with a Brake Transmis- the following precautions are not observed: sion Shift Interlock system (BTSI) that holds the •...
Page 144: Eight-Speed Automatic Transmission
Eight–Speed Automatic Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the Transmission vehicle is stopped. Be sure to keep your foot on The transmission gear range (PRNDS) is dis- the brake pedal when shifting between these played both beside the gear selector and in the gears.
Page 145 When parking on a hill, apply the parking brake WARNING! (Continued) WARNING! (Continued) before shifting the transmission to PARK. As an • Never leave children alone in a vehicle, or PARK (P) without blinking. Ensure that the added precaution, turn the front wheels toward vehicle is completely stopped, and the with access to an unlocked vehicle.
Page 146 The following indicators should be used to en- ing into strong head winds, or while towing a WARNING! sure that you have properly engaged the trans- heavy trailer), select TOW mode (refer to Do not coast in NEUTRAL and never turn off mission into the PARK position: “Selec-Track”...
Page 147: Autostick
Vehicle performance may be severely degraded NOTE: DRIVE position), or tap one of the shift paddles and the engine may stall. In some situations, the on the steering wheel. Tapping the (-) shift Even if the transmission can be reset, we rec- transmission may not re-engage if the engine is paddle to enter AutoStick mode will downshift ommend that you visit an authorized dealer at...
Page 148: Four-Wheel Drive Operation
stop, the driver should manually upshift (+) Selec-Track consists of the following positions: WARNING! transmission vehicle • Sport – Dry weather, on-road calibration. Do not downshift for additional engine brak- accelerated. Performance based tuning that provides a ing on a slippery surface. The drive wheels •...
Page 149 Custom Launch Control CAUTION! This mode allows the driver to create a custom This vehicle is equipped with a Launch Control Use on slippery or loose surfaces may cause vehicle configuration that is saved for quick system that is designed to allow the driver to damage to vehicle components and is not selection of favorite settings.
Page 150 • Vehicle must be on level ground. NOTE: NOTE: • Apply brake pressure. After launch control has been aborted, ESC will Use of DOT 4 brake fluid is suggested for return to its current ESC mode. extended track usage due to increased thermal •...
Page 151: Fuel Saver Technology 6.4L Only - If Equipped
• Tire pressure: 3. Do not continue for more than one full bur- less robust and increasing the likelihood of • 40 psi (276 kpa) hot, recommend 32 psi nishing lap after you start smelling the pulsation in further track use. (221 kpa) front, 30 psi (207 kpa) rear cold brakes.
Page 152: Speed Control - If Equipped
Alternate electric power steering efforts can be SPEED CONTROL — IF WARNING! selected through the Uconnect System. Refer to EQUIPPED Speed Control can be dangerous where the ”Customer Programmable Features” within When engaged, the Speed Control takes over system cannot maintain a constant speed. “Uconnect Settings”...
Page 153: To Set A Desired Speed
To Set A Desired Speed Metric Speed (km/h) Metric Speed (km/h) Turn the Speed Control on. When the vehicle • Pushing the SET (+) button once will result in • Pushing the SET (-) button once will result in has reached the desired speed, push the SET a 1 km/h increase in set speed.
Page 154: To Resume Speed
ACC will allow you to keep cruise control en- differently. Always confirm which mode is se- WARNING! gaged in light to moderate traffic conditions lected. Speed Control can be dangerous where the without the constant need to reset your cruise system cannot maintain a constant speed.
Page 155: Adaptive Cruise Control (Acc) Operation
Adaptive Cruise Control (ACC) Activating Adaptive Cruise Control WARNING! (Continued) Operation (ACC) • Will bring the vehicle to a complete stop The Speed Control buttons (located on the right You can only engage ACC if the vehicle speed is while following a target vehicle and hold side of the steering wheel) operates the ACC above 0 mph (0 km/h).
Page 156: To Activate/Deactivate
• When the brakes are overheated. NOTE: ACC cannot be set if there is a stationary vehicle • When the driver’s door is open at low speeds. in front of your vehicle in close proximity. • When the driver’s seat belt is unbuckled at Remove your foot from the accelerator pedal.
Page 157: To Turn Off
• The braking temperature exceeds normal Metric Speed (km/h) WARNING! range (overheated). • Pushing the SET (+) button once will result in The Resume function should only be used if • A Trailer Sway Control (TSC) event occurs. a 1 km/h increase in set speed. Each subse- traffic and road conditions permit.
Page 158: Setting The Following Distance In Acc
Metric Speed (km/h) set speed. When driving up hill and down hill, the ACC system will cancel if the braking • Pushing the SET (-) button once will result in temperature exceeds normal range a 1 km/h decrease in set speed. Each sub- (overheated).
Page 159: Overtake Aid
• The vehicle ahead moves out of your lane or NOTE: view of the sensor. The “Brake!” Screen in the instrument cluster • The distance setting is changed. display is a warning for the driver to take action and does not necessarily mean that the Forward •...
Page 160: Adaptive Cruise Control (Acc) Menu
Push the Adaptive Cruise Control (ACC) on/off If the target vehicle does not start moving within Display Warnings And Maintenance two seconds of your vehicle coming to a stand- button (located on the steering wheel) until one “Wipe Front Radar Sensor In Front Of still, the ACC with Stop system will cancel and of the following appears in the instrument cluster Vehicle”...
Page 161 • Installing a snow plow, front-end protector, an cleaning or removal of an obstruction. The sen- When the condition that created limited function- sor is located in the center of the vehicle behind aftermarket grille or modifying the grille is not ality is no longer present, the system will return the lower grille.
Page 162: Precautions While Driving With Acc
Precautions While Driving With ACC Turns And Bends Using ACC On Hills When driving on a curve with ACC engaged, the When driving on hills, ACC may not detect a In certain driving situations, ACC may have system may decrease the vehicle speed and vehicle in your lane.
Page 163: Normal (Fixed Speed) Cruise Control Mode
Lane Changing Normal (Fixed Speed) Cruise Control ACC may not detect a vehicle until it is com- Mode pletely in the lane in which you are traveling. In In addition to Adaptive Cruise Control mode, a the illustration shown, ACC has not yet detected Normal (Fixed Speed) Cruise Control mode is the vehicle changing lanes and it may not detect available for cruising at fixed speeds.
Page 164 • If the button is continually pushed, the set • If the button is continually pushed, the set To Set A Desired Speed speed will continue to increase in 5 mph speed will continue to decrease in 5 mph increments until the button is released. The decrements until the button is released.
Page 165: Parksense Rear Park Assist - If Equipped
To Resume Speed ParkSense off via ParkSense switch, or NOTE: To resume a previously set speed, push the changing the gear while the automatic brakes • The driver is always responsible for control- RES button and release. Resume can be used are being applied.
Page 166: Parksense Sensors
ParkSense Sensors If an obstacle is detected in the left and/or right rear region, the display will show a single arc in The four ParkSense sensors, located in the rear the left and/or right rear region and the system fascia/bumper, monitor the area behind the ve- will produce a tone.
Page 167 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Fast Tone Continuous Tone WARNING ALERTS Rear Distance Greater than 79-59 inches...
Page 168: Parksense Warning Display
NOTE: Enabling And Disabling ParkSense gear selector is moved to REVERSE and the system has detected a faulted condition, the ParkSense will reduce the volume of the radio, if ParkSense can be enabled and disabled with instrument cluster display will display the the ParkSense switch.
Page 169: Parksense Front And Rear Park Assist - If Equipped
• Jackhammers, large trucks, and other vibra- UNAVAILABLE SERVICE REQUIRED” mes- WARNING! (Continued) tions could affect the performance of sage to be displayed in the instrument cluster Also, the sensors could detect the ball ParkSense. display. mount and hitch ball assembly, depending •...
Page 170: Parksense Sensors
• ParkSense will retain its last known configu- forward, e.g. during a parking maneuver. If your ParkSense can be active only when the gear vehicle is equipped with an automatic transmis- ration state for the automatic braking function selector is in REVERSE or DRIVE. If ParkSense sion, the vehicle brakes may be automatically through ignition cycles.
Page 171: Parksense Display
ParkSense Display The warning display will turn on indicating the system status when the vehicle is in REVERSE or when the vehicle is in DRIVE and an obstacle has been detected. Single 1/2 Second Tone Slow Tone For Rear Only Park Assist Ready The system will indicate a detected obstacle by showing a single arc in the left and/or right front...
Page 172 The vehicle is close to the obstacle when the instrument cluster display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Fast Tone Continuous Tone WARNING ALERTS FOR REAR Rear Distance Greater than...
Page 173: Parksense Warning Display
WARNING ALERTS FOR FRONT Front Distance Greater than 47-39 inches 39-25 inches 25-12 inches Less than 12 inches (inches/cm) 47 inches (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) (30 cm) Audible Alert None None None Fast Continuous Chime Arcs-Left None None None...
Page 174: Service The Parksense Park Assist System
The ParkSense switch LED will be on when AVAILABLE WIPE FRONT SENSORS", or ParkSense System Usage ParkSense is disabled or requires service. The "PARKSENSE UNAVAILABLE SERVICE RE- Precautions ParkSense switch LED will be off when the QUIRED" messages if an object is detected NOTE: system is enabled.
Page 175: Parksense Active Park Assist System - If Equipped
• Use the ParkSense switch to turn the PARKSENSE ACTIVE PARK WARNING! (Continued) ParkSense system off if objects such as ASSIST SYSTEM — IF or damage to vehicles or obstacles be- bicycle carriers, trailer hitches, etc. are EQUIPPED cause the hitch ball will be much closer to placed within 12 inches (30 cm) from the rear fascia/bumper.
Page 176: Enabling And Disabling The Parksense Active Park Assist System
rain, snow, etc., or if searching for a parking The ParkSense Active Park Assist system will The ParkSense Active Park Assist system will space that has surfaces that will absorb the turn off automatically for any of the following only operate and search for a parking space ultrasonic sensor waves).
Page 177: Parallel Parking Space Assistance Operation/Display
• The feature will only indicate the last detected Parallel Parking Space Assistance Once the vehicle is in position, you will be parking space (example: if passing multiple instructed to stop the vehicle’s movement and Operation/Display available parking spaces, the system will only remove your hands from the steering wheel.
Page 178 When the driver places the gear selector into the NOTE: REVERSE position, the system may instruct the • It is the driver’s responsibility to use the brake driver to wait for steering to complete. and accelerator during the semi-automatic parking maneuver. •...
Page 179 When the driver places the gear selector into the When the vehicle has reached the end of its DRIVE position, the system may instruct the forward movement, the system will instruct the driver to wait for steering to complete. driver to check their surroundings and stop the vehicle’s movement.
Page 180: Perpendicular Parking Space Assistance Operation/Display
The system will then instruct the driver to check Perpendicular Parking Space NOTE: their surroundings and move backward. Assistance Operation/Display • When searching for a parking space, use the When the ParkSense Active Park Assist system turn signal indicator to select which side of is enabled, the “Active ParkSense Searching - the vehicle you want to perform the parking Push OK to Switch to Perpendicular”...
Page 181 When an available parking space has been Once the vehicle is at a standstill with your The system will then instruct the driver to check found, and the vehicle is not in position, you will hands removed from the steering wheel, you will their surroundings and move backward.
Page 182 space. The system will provide a warning to Once the vehicle is in a standstill condition, the The system will then instruct the driver to check the driver at 3 mph (5 km/h) that tells them to driver will be instructed to place the gear selec- their surroundings and move forward.
Page 183 NOTE: vehicle position, they should shift to PARK. The "Active ParkSense Complete - Check Parking It is the driver’s responsibility to use the brake Position" message will be momentarily dis- and stop the vehicle. The driver should check played. their surroundings and be prepared to stop the vehicle either when instructed to, or when driver intervention is required.
Page 184: Lanesense - If Equipped
The driver may manually override the haptic WARNING! (Continued) CAUTION! (Continued) warning by applying torque into the steering • The vehicle must be driven slowly when surroundings. Failure to do so can result in wheel at any time. serious injury or death. using the ParkSense Active Park Assist When only a single lane marking is detected and •...
Page 185: Turning Lanesense On Or Off
• When the LaneSense system senses the Turning LaneSense On Or Off LaneSense Warning Message lane has been approached and is in a lane The default status of LaneSense is off. The LED The LaneSense system will indicate the current departure situation, the left thick lane line in LaneSense button will be illuminated while lane drift condition through the instrument clus-...
Page 186: Changing Lanesense Status
Left Lane Departure — Both Lanes Detected • When the LaneSense system is on, the lane lines turn from gray to white to indicate that both of the lane markings have been detected. The LaneSense telltale is solid green when both lane markings have been de- tected and the system is on to provide visual warnings in the instrument cluster display and a torque warning in the steering wheel if an unin-...
Page 187: Parkview Rear Back Up Camera - If Equipped
• The system will not apply torque to the steer- Refer to “Uconnect Settings” in “Multimedia” for WARNING! ing wheel whenever a safety system engages further information. (anti-lock brakes, traction control system, Drivers must be careful when backing up When the vehicle is shifted out of REVERSE electronic stability control, forward collision even when using the ParkView Rear Back Up (with camera delay turned off), the rear camera...
Page 188: Refueling The Vehicle
Rear Camera — Viewing At Speed 2. Open the fuel filler door. Emergency Gas Can Refueling When the vehicle is in park, neutral or drive, the Most gas cans will not open the flapper doors. Rear View Camera can be activated with the A funnel is provided to open the flapper doors to “Rear View Camera”...
Page 189: Emergency Fuel Filler Door Release
Gross Vehicle Weight Rating (GVWR) CAUTION! The GVWR is the total permissible weight of To avoid fuel spillage and overfilling, do not your vehicle including driver, passengers, ve- “top off” the fuel tank after filling. hicle, options and cargo. The label also specifies maximum capacities of front and rear axle sys- tems (GAWR).
Page 190: Trailer Towing
Rim Size items down low and be sure that the weight is Common Towing Definitions This is the rim size that is appropriate for the tire distributed equally. Stow all loose items securely The following trailer towing related definitions size listed. before driving.
Page 191: Trailer Hitch Classification
Gross Axle Weight Rating (GAWR) Weight-Carrying Hitch WARNING! The GAWR is the maximum capacity of the front A weight-carrying hitch supports the trailer • An improperly adjusted Weight Distributing and rear axles. Distribute the load over the front tongue weight, just as if it were luggage located Hitch system may reduce handling, stabil- and rear axles evenly.
Page 192: Trailer Towing Weights (Maximum Trailer Weight Ratings)
Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium Duty 3,500 lbs (1,587 kg) Class III - Heavy Duty 5,000 lbs (2,267 kg) Class IV - Extra Heavy Duty 10,000 lbs (4,535 kg) Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)”...
Page 193: Trailer Hitch Receiver Cover Removal
NOTE: 3. Lower back down to disengage the tabs The trailer tongue weight must be considered as located at the top of the hitch receiver cover part of the combined weight of occupants and and then pull outwards to remove. cargo, and should never exceed the weight referenced on the Tire and Loading Information placard.
Page 194: Towing Requirements
NOTE: WARNING! WARNING! (Continued) Remember that everything put into or on the • Vehicles with trailers should not be parked Improper towing can lead to a collision. Fol- trailer adds to the load on your vehicle. Also, low these guidelines to make your trailer on a grade.
Page 195 Towing Requirements — Tires Towing Requirements — Trailer Lights And WARNING! (Continued) Wiring (If Equipped) • Proper tire inflation pressures are essential to • Towing any trailer will increase your stopping Whenever you pull a trailer, regardless of the the safe and satisfactory operation of your distance.
Page 196 Pin Number Function Wire Color Left Turn Signal Black/White Rear Fog Light White Ground/Common Return for Contacts (Pins) Brown 1 and 2 and 4 to 8 Right Turn Signal Black/Green Right Rear Position, Side Marker Lights, and Green/Red Rear Registration Plate Illumination Device. Stop Lights Black/Red Left Rear Position, Side Marker Lights, and...
Page 197: Towing Tips
Towing Tips can be maintained. Choose “4” or “3” if Trailer Hitch Attaching Points needed to maintain the desired speed. Your vehicle will require extra equipment to tow Before setting out on a trip, practice turning, a trailer safely and efficiently. The trailer tow stopping, and backing up the trailer in an area •...
Page 198: Recreational Towing
• Maintain sufficient distance between your ve- wheels to pull erratically to the right or left. This Trailer Tow Hitch Attaching Points And phenomenon occurs when there is a difference hicle and the vehicle in front of you to avoid a Overhang Dimensions in the surface traction under the front (driving) collision in a sudden stop.
Page 199 Shallow Standing Water CAUTION! (Continued) Although your vehicle is capable of driving • Determine the condition of the road or the through shallow standing water, consider the path that is under water and if there are any following Cautions and Warnings before doing obstacles in the way before driving through the standing water.
Page 200: In Case Of Emergency
IN CASE OF EMERGENCY • HAZARD WARNING FLASHERS ......200 • BULB REPLACEMENT ......200 •...
Page 201: Hazard Warning Flashers
This is an emergency warning system and it NOTE: HAZARD WARNING FLASHERS should not be used when the vehicle is in With extended use, the Hazard Warning flash- The Hazard Warning flasher switch is located on motion. Use it when your vehicle is disabled and ers may discharge the battery.
Page 202 Exterior Bulbs Bulb Number Headlamps (Low Beam) Premium Headlamps (Low/High Beam) D3S (Serviced at Authorized Dealer) Headlamps (High Beam) Premium Park/Turn Signal Lamp LED - (Service at Authorized Dealer) Premium Daytime Running Lamp (DRL) LED - (Service at Authorized Dealer) Front Fog Lamps LED - (Service at Authorized Dealer) Front Side Marker...
Page 203: Bulb Replacement
Bulb Replacement Halogen Headlamps — If Equipped NOTE: High Intensity Discharge Headlamps (HID) — If Equipped Lens fogging can occur under certain atmo- The headlamps are a type of high voltage spheric conditions. This will usually clear as discharge tube. High voltage can remain in the atmospheric conditions change to allow the con- circuit even with the headlamp switch off and the densation to change back to vapor.
Page 204 4. Turn the low or high beam bulb one–quarter 4. Twist socket counter clockwise and remove Rear Liftgate Mounted Tail Lamp turn counterclockwise to remove from hous- from lamp. ing. 5. Disconnect the electrical connector and re- place the bulb. Front Turn Signal Lamp The front turn signal lamps are LEDs.
Page 205 5. Tail lamps are now visible. Rotate socket(s) Rear Fascia Mounted Fog Lamp Center High-Mounted Stop Lamp (CHMSL) The center high mounted stop lamp is an LED. counter clockwise. 1. Using a fiber stick or flat blade screw driver, Service at an authorized dealer. gently pry between the inboard edge of the lamp and the fascia.
Page 206: Fuses
FUSES General Information Underhood Fuses The fuses protect electrical systems against The Power Distribution Center is located in the excessive current. engine compartment near the battery. This cen- WARNING! ter contains cartridge fuses, micro fuses, relays, When a device does not work, you must check •...
Page 207 Cavity Cartridge Fuse Micro Fuse Description 40 Amp Green – Anti-lock Brakes/Electronic Stability Control Pump 30 Amp Pink – Starter Solenoid 30 Amp Pink – Diesel Fuel Heater (Diesel Engine Only)/Brake Vacuum Pump 40 Amp Green – Body Controller/Exterior Lighting #2 30 Amp Pink –...
Page 208 Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink – Drive Train Control Module 30 Amp Pink – Slip Differential Control — If Equipped 30 Amp Pink – Sunroof - If Equipped 30 Amp Pink – Rear Defroster 25 Amp Clear –...
Page 209 Cavity Cartridge Fuse Micro Fuse Description – 10 Amp Red Air Conditioning Clutch – 20 Amp Yellow Ignition Coils / Ignition Coil Capacitors / Short Runner Valve Actuator — If Equipped (Gas) Urea Heater (Diesel) – 25 Amp Clear Fuel Injectors/Powertrain –...
Page 210 Cavity Cartridge Fuse Micro Fuse Description – 15 Amp Blue Instrument Cluster – 10 Amp Red Airbag Module – 10 Amp Red Airbag Module – 10 Amp Red Air Suspension — If Equipped – 15 Amp Blue Instrument Panel Cluster/SGW/ITBM — If Equipped F90/F91 –...
Page 211: Jacking And Tire Changing
CAUTION! WARNING! (Continued) WARNING! (Continued) • When installing the power distribution cen- • Being under a jacked-up vehicle is danger- reduced. You could have a collision and be severely or fatally injured. ter cover, it is important to ensure the cover ous.
Page 212: Spare Tire Stowage
Spare Tire Stowage 6. Block both the front and rear WARNING! (Continued) The spare tire is stowed under the load floor in of the wheel diagonally op- • Do not get under the vehicle when it is on a the rear cargo area and is secured to the body posite of the jacking posi- jack.
Page 213 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, Jacking Locations Front Jacking Location...
Page 214 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 7. Remove the lug nuts and wheel. 8.
Page 215: Road Tire Installation
correct tightness, have them checked with a Road Tire Installation torque wrench by an authorized dealer or at 1. Mount the road tire on the axle. a service station. 2. Install the remaining lug nuts with the cone 11. Lower the jack to the fully closed position shaped end of the nut toward the wheel.
Page 216: Jump Starting
JUMP STARTING NOTE: Be sure that the disconnected cable ends do not If your vehicle has a discharged battery, it can touch each other, or either vehicle, until properly be jump started using a set of jumper cables and connected for jump starting. a battery in another vehicle, or by using a portable battery booster pack.
Page 217: Jump Starting Procedure
Jump Starting Procedure 4. Connect the opposite end of the negative (-) 6. Once the engine is started, remove the jumper cable to the remote negative (-) post jumper cables in the reverse sequence: of the vehicle with the discharged battery. WARNING! Disconnecting The Jumper Cables 1.
Page 218: Refueling In Emergency
NOTE: CAUTION! (Continued) CAUTION! (Continued) There are steps that you can take to slow down etc.). Eventually, if plugged in long enough pointer drops back into the normal range. If the an impending overheat condition: without engine operation, the vehicle’s bat- pointer remains on HOT (H), and you hear con- •...
Page 219 Follow these steps to use the Manual Park 4. Using a screwdriver or similar tool, push the CAUTION! Release: metal latch in towards the tether strap. Closing the armrest while the Manual Park 1. Firmly apply the parking brake. Release is activated may damage the 2.
Page 220: Freeing A Stuck Vehicle
2. Once the tension has been released and the or less. Whenever the transmission remains in CAUTION! NEUTRAL for more than two seconds, you must lever has been unlocked, be sure it is stowed • Racing the engine or spinning the wheels press the brake pedal to engage DRIVE or properly and locks into position.
Page 221: Tow Eye Usage - If Equipped
ing the transmission out of PARK for loading Tow Eye Usage Precautions onto a flatbed truck. CAUTION! CAUTION! • The tow eye must only be used for road- • Towing this vehicle using any other method side emergencies. Use with an appropriate can cause severe transmission and/or device in accordance with highway code (a transfer case damage.
Page 222: Enhanced Accident Response System (Ears)
Front Tow Eye Installation EVENT DATA RECORDER The front tow eye receptacle is located behind a (EDR) door on the front bumper fascia. This vehicle is equipped with an Event Data To install the tow eye, open the door using the Recorder (EDR).
Page 224: Servicing And Maintenance
SERVICING AND MAINTENANCE • SCHEDULED SERVICING ......225 • ENGINE COMPARTMENT ......225 •...
Page 225 • Wheel And Wheel Trim Care ......248 • Tire Chains (Traction Devices) ......249 •...
Page 226: Scheduled Servicing
SCHEDULED SERVICING Refer to the “Service And Warranty Handbook” for scheduled servicing. ENGINE COMPARTMENT 6.2L Supercharged Engine 1 — Remote Jump Start Positive Terminal 7 — Washer Fluid Reservoir 2 — Power Distribution Center (Fuses) 8 — Engine Oil Dipstick 3 —...
Page 227: 6.4L Engine
6.4L Engine 1 — Remote Jump Start Positive Terminal 6 — Air Cleaner Filter 2 — Power Distribution Center (Fuses) 7 — Washer Fluid Reservoir 3 — Engine Oil Dipstick 8 — Coolant Pressure Cap (Radiator) 4 — Engine Oil Fill 9 —...
Page 228: Checking Oil Level
vals. Fill the reservoir with windshield washer Checking Oil Level WARNING! (Continued) solvent only (not radiator antifreeze). When re- To assure proper lubrication of your vehicle’s large amounts of water. Refer to “Jump filling the washer fluid reservoir, take some engine, the engine oil must be maintained at the Starting Procedure”...
Page 229: Dealer Service
Checking the oil while the vehicle is on level DEALER SERVICE Engine Oil Viscosity ground will improve the accuracy of the oil level SAE 0W-40 engine oil such as Mopar or Shell An authorized dealer has the qualified service readings. Maintain the oil level in the “SAFE” Helix is preferred for use in all operating tem- personnel, special tools, and equipment to per- range.
Page 230: Engine Oil Filter
Disposing Of Used Engine Oil And Oil WARNING! (Continued) Filters the air induction system (air cleaner, hoses, Care should be taken in disposing of used etc.) unless such removal is necessary for engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can repair or maintenance.
Page 231 3. Remove the air cleaner filter element from Gasoline Engine Air Cleaner Filter Inspection and Replacement — 6.2L the housing assembly. Supercharged Engine Inspect engine air cleaner filter for dirt and or debris, if you find evidence of either dirt or debris you should change your air cleaner filter.
Page 232: Accessory Drive Belt Inspection
• Noise (objectionable squeal, squeak, or Engine Air Cleaner Filter Installation When inspecting accessory drive belts, small rumble is heard or felt while drive belt is in cracks that run across ribbed surface of belt NOTE: operation) from rib to rib, are considered normal. These are Inspect and clean the housing if dirt or debris is not a reason to replace belt.
Page 233 Refrigerant Recovery And Recycling — The A/C air filter is located in the fresh air inlet WARNING! (Continued) R–1234yf behind the glove compartment. Perform the • The air conditioning system contains refrig- R–1234yf Air Conditioning Refrigerant is a hy- following procedure to replace the filter: erant under high pressure.
Page 234: Body Lubrication
NOTE: 8. Reinstall the glove compartment door on the When disengaging the glove compartment door door hinge and reattach the tension tether by from its hinges, there will be some resistance. inserting the tether clip in the glove compart- ment and sliding the clip away from the face 4.
Page 235: Windshield Wiper Blades
underhood services, the hood latch, release NOTE: Front Wiper Blade Removal/Installation mechanism and safety catch should be cleaned Life expectancy of wiper blades varies depend- and lubricated. ing on geographical area and frequency of use. CAUTION! Poor performance of blades may be present The external lock cylinders should be lubricated Do not allow the wiper arm to spring back with chattering, marks, water lines or wet spots.
Page 236 2. To disengage the wiper blade from the wiper latch release tab and snap it into its locked arm, flip up the release tab on the wiper position. Latch engagement will be accom- blade and while holding the wiper arm with panied by an audible click.
Page 237: Exhaust System
2. Lift the rear wiper arm fully off the glass. 3. Insert the wiper blade pivot pin into the opening on the end of the wiper arm. Grab the bottom end of the wiper arm with one hand, and press the wiper blade flush with the wiper arm until it snaps into place.
Page 238: Cooling System
• Do not idle the engine with any ignition com- WARNING! (Continued) CAUTION! (Continued) ponents disconnected or removed, such as make you unconscious and can eventually cause the converter to overheat, resulting when diagnostic testing, or for prolonged poison you. To avoid breathing CO, refer to in possible damage to the converter and periods during very rough idle or malfunction- “Safety Tips”...
Page 239 ant (antifreeze) is dirty, the system should be NOTE: Adding Coolant drained, flushed, and refilled with fresh OAT Your vehicle has been built with an improved • Mixing of engine coolant (antifreeze) other than coolant (conforming to MS.90032) by an autho- engine coolant (OAT coolant conforming to specified Organic Additive Technology (OAT) rized dealer.
Page 240 • Use only high purity water such as distilled or The cap should be inspected and cleaned if level is adequate. With the engine off and cold, deionized water when mixing the water/ there is any accumulation of foreign material on the level of the coolant (antifreeze) in the bottle engine coolant (antifreeze) solution.
Page 241: Brake System
contents of the coolant expansion bottle must WARNING! WARNING! (Continued) also be protected against freezing. Riding the brakes can lead to brake failure Using the wrong type of brake fluid can se- • If frequent engine coolant (antifreeze) addi- and possibly a collision. Driving with your foot verely damage your brake system and/or im- tions are required, the cooling system should resting or riding on the brake pedal can result...
Page 242: Front/Rear Axle Fluid
Front/Rear Axle Fluid Selection Of Lubricant Automatic Transmission Use only the manufacturer’s recommended For normal service, periodic fluid level checks Selection Of Lubricant fluid. Refer to “Fluids And Lubricants” in “Tech- are not required. When the vehicle is serviced It is important to use the proper transmission nical Specifications”...
Page 243: Raising The Vehicle
sion. Avoid using transmission sealers as they Fluid And Filter Changes Safety may adversely affect seals. Under normal operating conditions, the fluid installed at the factory will provide satisfactory WARNING! lubrication for the life of the vehicle. CAUTION! • Improperly inflated tires are dangerous and Routine fluid and filter changes are not required.
Page 244 • Inspect tires for signs of tire wear or visible creased by 3 psi (21 kPa), which equals 1 psi NOTE: damage. (7 kPa) for every 12°F (7°C) for this outside • Unequal tire pressures from side to side may temperature condition.
Page 245 Radial Ply Tires Run Flat Tires — If Equipped WARNING! Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a Fast spinning tires can be dangerous. Forces WARNING! rapid loss of inflation pressure. This rapid loss of generated by excessive wheel speeds may Combining radial ply tires with other types of inflation is referred to as the Run Flat mode.
Page 246 It is recommended you contact an authorized These indicators are molded into the bottom of WARNING! (Continued) the tread grooves. They will appear as bands tire dealer or original equipment dealer with any and have a collision resulting in serious injury when the tread depth becomes a 1/16 of an inch questions you may have on tire specifications or or death.
Page 247: Tire Types
roads are covered with ice or snow. For more speeds over 75 mph (120 km/h). For speeds WARNING! (Continued) information, contact an authorized dealer. above 75 mph (120 km/h) refer to original equip- • Failure to equip your vehicle with tires ment or an authorized tire dealer for recom- Summer tires do not contain the all season having adequate speed capability can re-...
Page 248 Spare Tire Matching Original Equipped Tire wheel, since the wheel is designed specifically WARNING! And Wheel — If Equipped for the collapsible spare tire. Your vehicle may be equipped with a spare tire Compact and collapsible spares are for tem- and wheel equivalent in look and function to the porary emergency use only.
Page 249: Wheel And Wheel Trim Care
Your wheels are susceptible to deterioration spare. This tire may look like the original CAUTION! equipped tire on the front or rear axle of your caused by salt, sodium chloride, magnesium vehicle, but it is not. Installation of this limited chloride, calcium chloride, etc., and other road Do not use scouring pads, steel wool, a use spare tire affects vehicle handling.
Page 250: Tire Chains (Traction Devices)
CAUTION! (Continued) CAUTION! CAUTION! (Continued) • Observe the traction device manufacturer’s SOFT CLOTH. Used on a regular basis; this To avoid damage to your vehicle or tires, is all that is required to maintain this finish. observe the following precautions: instructions on the method of installation, •...
Page 251: Storing The Vehicle
operated, extreme hot or cold weather and other NOTE: system lubrication to minimize the possibility of compressor damage when the system is extreme conditions will have an adverse effect The premium Tire Pressure Monitor System will started again. on paint, metal trim, and underbody protection. automatically locate the pressure values dis- played in the correct vehicle position following a The following maintenance recommendations...
Page 252: Preserving The Bodywork
Do not use abrasive cleaning components, sol- Special Care INTERIORS vents, steel wool or other aggressive material to • If you drive on salted or dusty roads or if you clean the lenses. Seats And Fabric Parts drive near the ocean, hose off the undercar- Use Mopar Total Clean to clean fabric uphol- riage at least once a month.
Page 253: Plastic And Coated Parts
Cleaning Plastic Instrument Cluster Lenses NOTE: WARNING! (Continued) The lenses in front of the instruments in this If equipped with light colored leather, it tends to must be replaced immediately. Do not disas- vehicle are molded in clear plastic. When clean- show any foreign material, dirt, and fabric dye semble or modify the system.
Page 254: Technical Specifications
TECHNICAL SPECIFICATIONS • IDENTIFICATION DATA ......254 • Vehicle Identification Number ......254 •...
Page 255: Identification Data
IDENTIFICATION DATA **Use only your authorized dealer recom- mended lug nuts/bolts and clean or remove any dirt or oil before tightening. Vehicle Identification Number The Vehicle Identification Number (VIN) is found Inspect the wheel mounting surface prior to on a label located on the left front corner of the mounting the tire and remove any corrosion or instrument panel pad, visible from outside of the loose particles.
Page 256: Fuel Requirements
Light spark knock at low engine speeds is not noted that an increase in fuel consumption harmful to your engine. However, continued should be expected when using ethanol- heavy spark knock at high speeds can cause blended fuels, due to the lower energy content damage and immediate service is required.
Page 257: Materials Added To Fuel
the responsibility of the manufacturer and may detergents, corrosion and stability additives are rials intended for gum and varnish removal may void or not be covered under the New Vehicle recommended. Using gasolines that have these contain active solvents or similar ingredients. Limited Warranty.
Page 258: Fluids And Lubricants
U.S. Metric Cooling System* 6.2L Engine (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula that meets 14.7 Quarts 13.9 Liters the requirements of FCA Material Standard MS.90032.) 6.2L Engine Intercooler (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula 4.0 Quarts 3.9 Liters that meets the requirements of FCA Material Standard MS.90032.) 6.4 Liter Engine (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula that 16 Quarts...
Page 259: Chassis
Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Transfer Case – Single-Speed (Selec-Track) We recommend you use Mopar ATF+4 Automatic Transmission Fluid.
Page 260: Multimedia
MULTIMEDIA • UCONNECT SYSTEMS ......261 • DRAG & DROP MENU BAR ......261 •...
Page 261 • STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED ..287 • Radio Operation ....... . .288 •...
Page 262: Uconnect Systems
2. Press and hold, then drag the selected App UCONNECT SYSTEMS The risk of unauthorized and unlawful access to your vehicle systems may still exist, even if the to replace an existing shortcut in the main For detailed information about your Uconnect most recent version of vehicle software (such as menu bar.
Page 263: Uconnect Settings
NOTE: UCONNECT SETTINGS Customer Programmable Features — Uconnect 4C/4C NAV Settings • FCA US LLC or your dealer may contact you The Uconnect system uses a combination of Press the “Apps ” button, then press the buttons on the touchscreen and buttons on the directly regarding software updates.
Page 264 Display After pressing the “Display” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Display Mode Manual Auto Display Brightness With Head- lights ON NOTE: To make changes to the "Display Brightness With Headlights ON" setting, the headlights must be on and the interior dimmer switch must not be in the "party"...
Page 265 Setting Name Selectable Options Touchscreen Beep Control Screen Time-Out — If Equipped NOTE: When the “Control Screen Time-Out” feature is selected, the Controls Screen will stay open for five seconds before the screen times out. With the feature deselected, the screen will stay open until it is manually closed. Nav Next Turn Pop-up In Cluster —...
Page 266 Voice After pressing the “Voice” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Voice Response Length Brief Detailed Show Command List Always With Help Never Clock After pressing the “Clock” button on the touch- screen, the following settings will be available: Setting Name Selectable Options...
Page 267 Safety & Driving Assistance After pressing the “Safety/Assistance” button on the touchscreen, the following settings will be available: Setting Name Selectable Options ParkView Backup Camera Delay — If Equipped NOTE: The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE.
Page 268 Setting Name Selectable Options Forward Collision Warning Sen- Near sitivity — If Equipped NOTE: The “Forward Collision Warning Plus (FCW+) Sensitivity” setting determines at what relative distance the vehicle directly in front of you needs to be at, before the system will warn you of a possible collision with the vehicle directly in front of you, based on the option is selected. “Far” will give you the most amount of reaction time, whereas “Near”...
Page 269 Setting Name Selectable Options LaneSense Strength — If Medium High Equipped Blind Spot Alert — If Equipped Lights Lights and Chime NOTE: When the “Blind Spot Alert” feature is selected, the Blind Spot Alert system is activated and will show a visual alert in the outside mirrors, or it will show a visual alert in the outside mirrors as well as play an audible alert when the turn signal is on.
Page 270 Lights After pressing the “Lights” button on the touch- screen, the following settings will be available: Setting Name Selectable Options 0 sec 30 sec Headlight Off Delay 60 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off. 0 sec 30 sec Headlight Illuminated On Approach...
Page 271 Doors & Locks After pressing the “Doors & Locks” button on the touchscreen, the following settings will be avail- able: Setting Name Selectable Options Auto Unlock On Exit NOTE: When this feature is selected, all doors unlock when the vehicle is stopped, the transmission is in the PARK or NEUTRAL position and the driver’s door is opened.
Page 272 Setting Name Selectable Options Personal Settings Linked to Key Fob — If Equipped NOTE: This feature provides automatic recall of all settings stored to a memory location (driver’s seat, exterior mirrors, steering column position and radio station pre-sets) to enhance driver mobility when entering and exiting the vehicle. Power Lift Gate Alert —...
Page 273 Engine Off Options After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available: Setting Name Selectable Options 0 sec 5 min Engine Off Power Delay — If Equipped 45 sec 10 min NOTE: When the “Engine Off Power Delay” feature is selected, the power window switches, radio, Uconnect phone system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to ten minutes after the ignition is cycled to OFF.
Page 274 Audio After pressing the “Audio” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Balance/Fade Speaker Icon NOTE: When in this display you may adjust the “Balance/Fade” of the audio by pressing and dragging the “Speaker Icon” toward any location in the box. Equalizer Bass Treble...
Page 275 Phone/Bluetooth After pressing the “Phone/Bluetooth” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Paired Phone And Audio Sources List Of Paired Audio Sources NOTE: This feature shows which phones and/or audio devices are paired to the Phone/Bluetooth system. For further information, refer to the Uconnect Own- er’s Manual Supplement.
Page 276 Reset After pressing the “Reset” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Reset App Drawer Cancel Restore Settings Cancel NOTE: When this feature is selected it will reset all settings to their default settings. Clear Personal Data Cancel NOTE:...
Page 277: Performance Pages - If Equipped
PERFORMANCE PAGES — IF The Performance Pages include the following: When Home is selected, a series of widgets (gauges) can be customized by the user. Follow • Home EQUIPPED these steps to change a widget: • Timers Performance Pages is an application that pro- 1.
Page 278: Timers
• Timer: 0–60 MPH When the Timers Page is selected, you will be • Timer: 0–100 MPH able to select from the following “Tickets”: • Timer: 60 ft — If Equipped • Recent • Timer: 1/8 Mile Pressing the “Recent” button displays a “real •...
Page 279: Gauges
• ¼ Mile (400 meter) MPH NOTE: Gauges The Reaction Time, MPH, ⅛ and ¼ Mile timers Displays the speed the vehicle was at when ¼ will be “ready” when the vehicle is at 0 MPH mile (400 meters) was reached. (0 km/h).
Page 280: G-Force
• Trans Oil Temp When selected, this screen displays all four G-Force values, as well as steering angle. Shows the current transmission oil temperature. When G-Force is selected, the following fea- • Intake Air Temperature tures will be available: Shows the actual air intake temperature. •...
Page 281: Engine
• Steering Wheel Angle When selected, this screen displays the follow- Dynamometer (Dyno) ing values: Steering Wheel Angle utilizes the steering angle • Vehicle Speed sensor to measure the degree of the steering wheel relative to zero (straight ahead) reference Shows the actual vehicle speed.
Page 282: Srt Drive Modes
SRT DRIVE MODES displayed indicating which values are not matching the current mode. NOTE: Listed below are the available Drive Modes: The use of Sport Mode, Track Mode, or Launch Control is not recommended when using the Track Mode Roof Luggage Rack to carry a load. Drive Modes •...
Page 283: Sport Mode
Sport Mode Tow Mode Snow Mode Drive Modes (Sport) Drive Modes (Tow) Drive Mode (Snow) Selecting “Sport” with the Selec-Track switch Selecting “Tow” with the Selec-Track switch will Selecting “Snow” with the Selec-Track switch activates the configuration for typical enthusiast activate the configuration for towing a trailer or will activate snow mode for use on loose traction driving.
Page 284: Auto Mode
Auto Mode Custom Mode may be selected by pushing the “Custom” button on Selec-Track switch. Custom Mode allows you to create a custom configura- tion that is saved for quick selection of your favorite settings. While in Custom Mode, the All-Wheel Drive, Stability Control, Transmission, Steering, Suspension, and Paddle Shifter set- tings are shown in their current configuration.
Page 285: Race Options
Set-Up” to set the holding RPM. Launch Mode RACE OPTIONS WARNING! (Continued) can be turned on or off by either pushing the any public roadways. It is recommended that Launch Control button on the Selec-Track this feature be used in a controlled environ- Switch, or by pressing the “Cancel Launch ment, and within the limits of the law.
Page 286: Race Cooldown - If Equipped
This feature is a visual cue to manually up-shift The Shift Light RPM Set-Up allows you to set using the paddle shifters. the shift light to illuminate for gears 1, 2, 3, 4, and 5-8. Pressing and releasing the up/down To activate the Shift Light feature, press the arrow buttons above and below each listed gear, “Shift Light”...
Page 287: Valet Mode
• Steering wheel paddle shifters are disabled. NOTE: Race Cooldown feature (After-Run) will VALET MODE only come on with engine off. The temperature • The Drive Mode interface is not available. will display with engine running also, but After- Pushing the SRT button on Selec-Track Run Cooling will not be functioning.
Page 288: Eco Mode
ECO MODE STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. Valet Mode Deactivation PIN The Valet Mode Deactivation key pad will then prompt you for your four digit PIN code, enter Eco Mode Steering Wheel Audio Controls (Back View Of...
Page 289: Radio Operation
• Your vehicle may be equipped with a Blu-ray The following describes the left-hand control For further information, refer to the Uconnect operation in each mode. Owner’s Manual Supplement. disc player. If equipped with a Blu-ray disc player, the icon will be present on the player. Radio Operation UCONNECT REAR SEAT •...
Page 290: Dual Video Screen
Dual Video Screen lects the appropriate mode after the disc is recognized and displays the menu screen, NOTE: the language screen, or starts playing the Typically there are two different ways to operate first track. the features of the Rear Seat Entertainment System.
Page 291: Play Video Games
Using The Touchscreen Radio 5. RSE Channel 2 Mode key, and using the up and down arrows, highlight disc from the menu and press the Indicates the current source for Screen OK button. 2/Channel 2. This button will be highlighted •...
Page 292: Play A Dvd/Blu-Ray Disc Using The Touchscreen Radio
2. Right audio in (red). Using The Remote Control 1. Push the SOURCE button on the Remote 3. Left audio in (white). Control. 4. Video in (yellow). 2. While looking at Rear 1 or 2, highlight DISC NOTE: by either pushing Up/Down/Left/Right but- Certain high-end video games consoles may tons, then push ENTER/OK.
Page 293: Important Notes For Dual Video Screen System
4. Channel/Screen Selector Switch — Indicates NOTE: Blu-ray Disc Player Remote Control Pressing the screen on the radio while a DVD or which channel is being controlled by the — If Equipped Blu-ray Disc is playing, brings up the basic remote control.
Page 294: Headphones Operation
(Stop) — Stops disc play. Changing the Audio Mode for Headphones 1. Ensure the Remote Control channel/screen — Push and hold to fast rewind selector switch is in the same position as the through the current audio track or video headphone selector switch.
Page 295: Replacing The Headphone Batteries
Replacing The Headphone Batteries APTIV IS NOT LIABLE FOR ANY INJURIES OR System Information DAMAGES TO PERSONS OR PROPERTY RE- Each set of headphones requires two AAA bat- Disc Menu SULTING FROM THE USE OF, OR ANY FAIL- teries for operation. To replace the batteries: When listening to a CD Audio or CD Data disc, URE OR DEFECT IN, THE PRODUCT, NOR IS pushing the remote control’s POP UP/MENU...
Page 296 tons ( , ) to change the value for the currently Disc Formats Recorded Discs selected item. To reset all values back to the The Blu-ray Disc player is capable of playing the The Blu-ray Disc player will play CD-R and original settings, select the Default Settings following types of 4.7 inches (12 cm) diameter CD-RW discs recorded in CD-Audio or...
Page 297: Radio Operation And Mobile Phones
• Other compression formats such as AAC, If you are still having trouble writing a disc that is The Blu-ray Disc player may shut down during playable in the Blu-ray Disc player, check with MP3 Pro, Ogg Vorbis, and ATRAC3 will not extremely hot conditions, such as when the the disc recording software publisher for more play.
Page 298: Uconnect Voice Recognition Quick Tips
does not satisfactorily “clear” by the reposition- Get Started ing of the antenna, it is recommended that the All you need to control your Uconnect system radio volume be turned down or off during with your voice are the buttons on your steering mobile phone operation when not using wheel.
Page 299: Radio
Radio Media Use your voice to quickly get to the AM or FM Uconnect offers connections via USB, Bluetooth radio stations you would like to hear. and auxiliary ports (If Equipped). Voice opera- tion is only available for connected USB and Push the VR button .
Page 300: Voice Text Reply - If Equipped
TIP: When providing a Voice Command, push 2. Listen to the Uconnect prompts. After the Apple iPhone iOS 6 or later supports reading incoming text messages only. To enable this beep, repeat one of the pre-defined mes- the Phone button and say “Call,”...
Page 301: Climate
Climate Navigation (4C NAV) — If Equipped Siri Eyes Free — If Equipped Too hot? Too cold? Adjust vehicle temperatures The Uconnect navigation feature helps you save Siri lets you use your voice to send text mes- hands-free and keep everyone comfortable time and become more productive when you sages, select media, place phone calls and while you keep moving ahead.
Page 302: Using Do Not Disturb
• Text Messages Using Do Not Disturb Android Auto — If Equipped With Do Not Disturb, you can disable notifica- • Additional Apps NOTE: tions from incoming calls and texts, allowing you Feature availability depends on your carrier and to keep your eyes on the road and hands on the mobile phone manufacturer.
Page 303: Apple Carplay - If Equipped
Apple CarPlay — If Equipped CD/DVD DISC MAINTENANCE To keep a CD/DVD in good condition, take the NOTE: following precautions: Feature availability depends on your carrier and • Handle the disc by its edge; avoid touching mobile phone manufacturer. Some Apple Car- the surface.
Page 304: Customer Assistance
CUSTOMER ASSISTANCE • IF YOU NEED ASSISTANCE ......304...
Page 305 IF YOU NEED ASSISTANCE The manufacturer’s distributors are vitally inter- ested in your satisfaction with their products and services. If a servicing problem or other difficulty should occur, we recommend that you take the following steps: • Discuss the problem at the authorized dealer with the dealer principal or the service man- ager.
Page 306: Index
INDEX...
Page 307 Adaptive Cruise Control (ACC) (Cruise Alarm Autostick....146 Control)....153 Arm The System .
Page 308 Cargo Area Cover ....62 Radiator Cap ....239 Anti-Lock Brake System ..88 Cargo Compartment .
Page 309 Enhanced Accident Response Ethanol ....255 Heated Seats ....33 Feature .
Page 310 Disarm The System ... .24 Daytime Running ....42 Power Door ....25 Programming Additional Key Fobs .
Page 311 Disposal ....229 Windows ....55 Remote Starting Filter .
Page 312 Reminder ....104 Speed Control (Cruise Control) ..151, 153 System, Remote Starting ...21 Seat Belt Pretensioner .
Page 313 Guide ....191 Uconnect Settings Windshield Defroster ... . .130 Recreational ....197 Customer Programmable Features .
Page 656 Grand Cherokee SRT 1 9 W K S R T- 1 2 6 - E N A - A A...

Jeep Grand Cherokee SRT 2019 Owner's Manual

Grand Cherokee Srt

2 Graphical

3 Getting to Know Your Vehicle

4 Getting to Know Your Instrument Panel

5 Safety

6 Starting and Operating

7 In Case of Emergency

8 Servicing and Maintenance

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Jeep Grand Cherokee SRT 2019

Summary of Contents for Jeep Grand Cherokee SRT 2019