Jeep J-10 Series 1982 Technical & Service Manual page 843

BRAKES 2G-51
Torque Specifications (Continued)
Power Brake Unit-to- Dash Mounting Bolts/ Nuts 22 18-25 30
Brake Line-to-Caliper Fitting Bolt (CJ, Scrambler) 25 20-30 34
Brake Line-to-Wheel Cylinder Fitting 160 in-lbs. 120-200 in-ibs. 18
Parking Brake Cable Clamp-to-Support Plate Bolts (5/16-18) 10 8-12 14
Wheel Nuts (CJ, Scrambler) 75 65-80 102
Wheel Nuts (Cke, Wag, Trk) 75 65-80 102
Wheel Nuts (8400) GVW Trk) 130 110-150 176
Brake Pedal-to-Power Unit Push Rod Bolt/Nut 35 25-40 47
Caliper Mounting Bolts (Cke, Wag, Trk) 35 30-40 47
Caliper Mounting Pins 30 25-35 40
Disc. Brake Shield Bolts (Cke, Wag, Trk) 8 5-10 11
Disc. Brake Shield Nuts (Cke, Wag, Trk) 35 30-40 47
Wheel Bearing Outer Locknut (All) 50 (min.) 68 (min.)
Wheel Bearing Inner Locknut (Bearing Adjuster):
CJ, Scrambler Tighten to 50 ft-lbs. (68 N-m) and back off 1/6 turn while
Cke, Wag, Trk . Tighten to 50 ft-lbs. (68 N-m) and back off 1/6 turn while
All Torque values given in foot-pounds and newton meters with dry fits unless otherwise specified.
J-8002
WHEEL CYLINDER CLAMPS
J-22904
DUST BOOT INSTALLER
J-26819-24
BRAKE BLEEDER
ADAPTER
J-26819-30
BRAKE BLEEDER
EXTENSION
Tools
ssairav, ?
J-21177
DRUM BRAKE
CLEARANCE GAUGE
-Jl
SS3BBH
J-23709
METERING VALVE TOOL
(TYPE-D VALVE)
.-CI
J-8001
DIAL INDICATOR SET
J-8057
BRAKE SPRING TOOL
J-26869
METERING VALVE TOOL
(TYPE-W VALVE)
J-33028
DUST SEAL
INSTALLER
V_
J-26819-25
BLEEDER ADAPTER
CLAMP
24-34
27-41
14-23
11-16
88-108
88-108
149-203
34-54
41-54
34-47
7-14
41-54
rotating wheel,
rotating wheel.
60647
80397