Instrument Cluster; Instrument Panel - Jeep J-10 Series 1982 Technical & Service Manual

r
p
p
p
p
p
p
p
p
p
p
P
INSTRUMENT
PANELS AND
COMPONENTS
SECTION INDEX
Page
Cherokee-Wagoneer-Truck Instrument Panel 3C-4
CJ and Scrambler Instrument Panel 3C
CI AND SCRAMBLER
INSTRUMENT PANEL
Cigar Lighter
Clock
Crash Pad
General
Glove Box Assembly
3C-4
3C-4
3C-2
3C-1
3C-3
GENERAL
CJ and Scrambler instrument panels are of formed
sheet metal construction and are reinforced with braces
and fastened to adjacent body panels with screws.
A crash pad is available for CJ and Scrambler models
and is attached to the instrument panel (fig. 3C-1).
Fig. 3C-1 Instrument Panel
Instrument Cluster
Instrument Illumination
Instrument Panel
Speedometer
Pi|
3C
3C
3C
3C
INSTRUMENT CLUSTER
Removal
(1) Disconnect battery negative cable.
NOTE: If equipped with air conditioning, rem
screws attaching evaporator assembly to instrum
panel and lower evaporator assembly.
(2) Disconnect speedometer cable.
(3) Remove cluster attaching screws and rem
cluster.
(4) Mark bulb and wire connectors, and disconr.
cluster electrical connectors and lamps.
Installation
(1) Connect cluster lamps and electrical connectc
(2) Position cluster on instrument panel and ins
attaching screws.
(3) Connect speedometer cable.
(4) Connect battery negative cable.
INSTRUMENT PANEL
Removal
(1) Disconnect battery negative cable.