Measuring Rotor Clearance—Model 999; Pump Bushing Removal—Model 999; Pump Bushing Installation—Model 999 - Jeep J-10 Series 1982 Technical & Service Manual

2C-44 AUTOMATIC TRANSMISSION
FEELER
GAUGE
VIEW A
SIDE CLEARANCE 0.004 TO 0.008 INCH
Fig. 2C-52 Measuring Rotor Clearance—Model 999
(1) Thread Bushing Remover Tool J-24036 straight
into bushing as far as possible by hand (fig. 2C-56).
(2) Using wrench, thread remover tool into bushing
three or four additional turns to fully engage threads of
tool in bushing.
(3) Install Slide Hammer Tools J-7004-3 and J-6585-
1 in remover tool (fig. 2C-56).
(4) Bump outward with slide hammers to remove
bushing.
(5) Clean chips from reaction shaft support
assembly.
(6) Grip old bushing with pliers and remove it from
Tool J-24036.
Fig. 2C-53 Pump Bushing Removal—Model 999
TOOL
J-S092
60170
41818
Fig. 2C-54 Pump Bushing Installation—Model 999
CAUTION: Be sure to protect the remover tool threads
when using the tool.
(7) Thread Bushing Installer Tool J-24032 onto
Driver Handle J-8092 (fig. 2C-57).
(8) Position replacement bushing on installer tool
and install bushing straight into shaft bore until tool
bottoms (fig. 2C-57).