Storage Compartment - Jeep J-10 Series 1982 Technical & Service Manual

BODY AND FRAME COMPONENTS 3F-21
SOCKET
VERTICAL
SUPPORT
BLADE
VERTICAL
SUPPORT
ROD
Fig. 3F-30 Soft Top Supports lor Metal Door
STORAGE COMPARTMENT
GENERAL
A storage compartment is available on all CJ models,
however, the rear seat must be deleted on the CJ-5
models when a storage compartment is installed.
The storage compartment can be locked with a key
and is also bolted to the body side panels for added
security.
Removal
(1) Open storage compartment and remove attach
ing screws and washers shown in figure 3F-31.
(2) Remove storage compartment assembly.
(3) Remove rubber washers from wheelhouse.
Installation
(1) Position rubber washers
partment mounting holes.
(2) Position storage compartment assembly in ve
hicle and align holes with rubber washers and holes in
wheelhouse.
(3) Install storage compartment attaching screws
and washers, tighten to 10 to 15 foot-pounds torque.
on storage com-
STOWAGE
COMPARTMENT
Rg. 3F-31 Storage Compartment—CJ Models
81015