Jeep J-10 Series 1982 Technical & Service Manual page 1090

3H-12 LIFTGATES—TAILGATES
(2) Position motor on regulator and install attach
ing screws.
(3) Position regulator in tailgate and install attach
ing screws.
(4) Connect wiring harness to motor.
(5) Position channel over regulator arm pins and
install replacement retainers.
(6) Install access cover plate.
(7) Install carpet, if equipped.
Motor /=»
Removtl
(1) Remove tailgate window regulator, as outlined **"*
above. , ^
(2) Remove motor attaching screws (fig. 3H-5) and
motor from regulator. ^
TAILGATE REGULATOR
90186
Fig. 3H-5 Power Tailgate Window Regulator and Motor