Subaru Impreza 2003 Service Manual page 1134

COOLING
16) Connect the battery ground cable to battery.
17) Fill engine coolant. <Ref. to CO(H4DOTC)-17,
FILLING OF ENGINE COOLANT, REPLACE-
MENT, Engine Coolant.>
18) Check the ATF level. <Ref. to 4AT-31, IN-
SPECTION, Automatic Transmission Fluid.>
RADIATOR
C: INSPECTION
1) Remove the coolant filler tank cap, top off cool-
ant filler tank, and then attach the tester to coolant
filler tank in place of cap.
FU-00009
2) Apply a pressure of 122 kPa (1.2 kg/cm
to the radiator to check if:
(1) Engine coolant leaks at/around radiator.
(2) Engine coolant leaks at/around hoses or
connections.
CAUTION:
• Inspection must be carried out at the side of
coolant filler tank, not at the side of radiator.
• Engine should be turned off.
• Wipe engine coolant from check points in ad-
vance.
• Be careful to prevent engine coolant from
spurting out when removing the tester.
• Be careful also not to deform the filler neck of
coolant filler tank when installing or removing
tester.
CO(H4DOTC)-26
CO-00043
2
, 18 psi)