Subaru Impreza 2003 Service Manual page 1157

13) Remove the nuts which install the front cushion
rubber onto front crossmember.
14) Remove the bolts which install the oil pan on
cylinder block while raising up engine.
15) Insert the oil pan cutter blade between cylinder
block-to-oil pan clearance.
CAUTION:
Do not use a screwdriver or similar tool in place
of oil pan cutter.
16) Remove the oil strainer.
17) Remove the baffle plate.
OIL PAN AND STRAINER
B: INSTALLATION
CAUTION:
Before installing the oil pan, clean sealant from
oil pan and engine block.
1) Install the baffle plate.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
LU-00030
2) Install the oil strainer onto baffle plate.
NOTE:
Replace the O-ring with a new one.
Tightening torque:
10 N·m (1.0 kgf-m, 7.2 ft-lb)
LU-00031
3) Apply fluid packing to the mating surfaces, and
then install the oil pan.
Fluid packing:
THREE BOND 1215 (Part No. 004403007) or
equivalent
LU-00032
LU-00033
LU(H4DOTC)-15
LUBRICATION
LU-00033
LU-00032
LU-00034