To replace media drives
Perform the procedures in the following order to replace media drives:
1.
2.
Removing the media drive carrier from the chassis
When replacing the media hard drives, the first step is to remove the media drive carrier from
the media drive bay.
Requirements
To remove the media drive carrier from the media drive bay, you require the following:
• keys for the front bezel doors
• a Phillips screwdriver
• cable identification labels
• a pen or pencil
Locate the media drives
The media drives (CD-ROM drive, tape drive, and floppy drive) are shown in the bottom right
corner shown in
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Removing the media drive carrier from the chassis
Replacing a tape, CD-ROM or floppy drive
Figure 24: Media drives
Removing the media drive carrier from the chassis
on page 101
on page 104
on page 102.
December 2010
101