Ip Igmp Snooping Query-Interval - SMC Networks SMC8748ML3 Management Manual

C L
OMMAND INE
Command Usage
The query count defines how long the querier waits for a response from
a multicast client before taking action. If a querier has sent a number of
queries defined by this command, but a client has not responded, a
countdown timer is started using the time defined by ip igmp snooping
query-max- response-time. If the countdown finishes, and the client
still has not responded, then that client is considered to have left the
multicast group.
Example
The following shows how to configure the query count to 10:
Console(config)#ip igmp snooping query-count 10
Console(config)#
Related Commands
ip igmp snooping query-max-response-time (4-303)

ip igmp snooping query-interval

This command configures the query interval. Use the no form to restore the
default.
Syntax
ip igmp snooping query-interval seconds
no ip igmp snooping query-interval
seconds - The frequency at which the switch sends IGMP host-query
messages. (Range: 60-125)
Default Setting
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
Console(config)#ip igmp snooping query-interval 100
Console(config)#
4-302
I
NTERFACE