Ip Igmp Snooping Query-Interval - SMC Networks 6824MPE INT Management Manual

Example
The following shows how to configure the query count to 10:
Console(config)#ip igmp snooping query-count 10
Console(config)#
Related Commands
ip igmp snooping query-max-response-time (4-268)

ip igmp snooping query-interval

Use this command to configure the query interval. Use the no form to
restore the default.
Syntax
ip igmp snooping query-interval seconds
no ip igmp snooping query-interval
seconds - The frequency at which the switch sends IGMP host-query
messages. (Range: 60-125)
Default Setting
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
Console(config)#ip igmp snooping query-interval 100
Console(config)#
M F
ULTICAST ILTERING
C
OMMANDS
4-267