Show Ip Access-Group; Map Access-List Ip - SMC Networks 6824MPE INT Management Manual

C L
OMMAND INE
Example
Console(config)#int eth 1/2
Console(config-if)#ip access-group standard david in
Console(config-if)#
Related Commands
show ip access-list (4-131)

show ip access-group

This command shows the ports assigned to IP ACLs.
Command Mode
Privileged Exec
Example
Console#show ip access-group
Interface ethernet 1/2
IP standard access-list david
Console#
Related Commands
ip access-group (4-137)

map access-list ip

This command sets the output queue for packets matching an ACL rule. The
specified CoS value is only used to map the matching packet to an output
queue; it is not written to the packet itself. Use the no form to remove the
CoS mapping.
Syntax
[no] map access-list ip acl_name cos cos-value
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• cos-value – CoS value. (Range: 0-7)
4-138
I
NTERFACE