Flash/File Commands; Copy; Table 4-25 Flash/File Commands - SMC Networks 8748L2 Management Manual

Flash/File Commands

These commands are used to manage the system code or configuration
files.
Command

copy

delete
dir
whichboot
boot system
copy
This command moves (upload/download) a code image or configuration
file between the switch's flash memory and a TFTP server. When you save
the system code or configuration settings to a file on a TFTP server, that
file can later be downloaded to the switch to restore system operation. The
success of the file transfer depends on the accessibility of the TFTP server
and the quality of the network connection.
Syntax
copy file {file | running-config | startup-config | tftp | unit}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config |
https-certificate | public-key}
copy unit file
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the
current running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.

Table 4-25 Flash/File Commands

Function
Copies a code image or a switch configuration
to or from flash memory or a TFTP server
Deletes a file or code image
Displays a list of files in flash memory
Displays the files booted
Specifies the file or image used to start up the
system
F /F C
LASH ILE OMMANDS
Mode
PE
PE
PE
PE
GC
Page
4-83
4-86
4-87
4-88
4-89
4-83