To Select The Measurement Time Mode; To Set The Averaging Rate; To Set The Trigger Delay Time - Agilent Technologies 4349B Manual

4349B

To Select the Measurement Time Mode

The current measurement time setting is indicated by the Meas Time annunciator(
To select the measurement time:
Press until the measurement time is set to the desired value (10 ms, 30 ms, 100 ms, or
400 ms.)

To Set the Averaging Rate

To set the averaging rate or to show the current setting:
1. Press .
2. Enter the desired value, or press
3. Press to set the value and to exit.
The current averaging rate can be displayed in the Measurement Settings area (see \To
Change the Measurement Settings Display").

To Set the Trigger Delay Time

To set the trigger delay time:
1. Press .
2. Enter the desired value.
3. Press to set the value and to exit.
The current trigger delay time can be displayed in the Measurement Settings area of the LCD
display (see \To Change the Measurement Settings Display").
to select the value.
).
9
Operating the 4349B 2-7