Analog Output Settings - Agilent Technologies 1260 User Manual

Analog Output Settings

To change the Output Range of the analog outputs see
page 100.
1 To change the offset and the attenuation select Analog Outputs.
2 Change the ranges for absorbance and wavelength according your needs.
Figure 45 Analog Output Settings
3 Change the values if required.
Agilent 1260 Infinity DAD and MWD User Manual
Special Settings of the Detector
Zero Offset Limits: 1 to 99% in steps of 1%
Attenuation Limits: 0.98 to 2000 mAU at discrete values
for either 100 mV or 1 V full scale
Using the Detector
"Control Settings" on
5
107