Installing the Optical Unit (G1315A/G1365A)
When required
Tools required
Use this procedure for the the G1315A/G1365A only. For G1315B/G1365B detectors refer
N O T E
to
The fan must be installed in the correct orientation to ensure correct cooling and
C A U T I O N
operation of the detector, see
Preparations for this procedure:
•
The power supply, the fan and the processor board are
already installed.
1100 Series DAD and MWD Reference Manual
When repairs have been completed
Screwdriver POZI 1 PT3
"Installing the Optical Unit (G1315B/G1365B)"
on page 173
"Exchanging the Fan (G1315A/G1365A)"
1 Check that the shock absorbers and the leak sensor cable
is placed correctly.
Repairing the Detector
on page 148.
4
171