Viewing The Storage Configuration; Storage Configuration Page Parameters - HPE StoreOnce 6500 User Manual

Status
Segment Corrupted
Usage Stale

Viewing the storage configuration

Procedure
Navigate to the Storage > Storage configuration tab.
View details about configured and unconfigured storage, and to see the raw storage capacity for your
appliance.
If your StoreOnce product supports capacity expansion, you will use the Storage Configuration tab to
scan for the new storage and expand the capacity of your system. For more information, see the capacity
expansion guide for your product.
More information
Scanning for storage on page 133
Storage Configuration page parameters on page 129

Storage Configuration page parameters

The top section of the Storage Configuration page is the Capacity section. This shows the physical
storage configuration for your appliance.
Table 43: Capacity parameters
Field
Configured Raw Storage The total amount of raw disk storage capacity (in TB) that is currently
Licensed Storage
Description
Some or all of the storage
components have detected a
problem.
The health status has not been
updated recently on some or all
of the storage components.
Description
provisioned for use.
The total capacity (in TB) that is licensed. This is the sum of all capacity
licenses that have been applied. This also includes the base storage capacity
that does not require a license.
Recommended Actions
Contact Hewlett Packard
Enterprise Support.
This may be temporary and
resolve itself. If it does not,
reboot the appliance. If rebooting
does not resolve the issue,
contact Hewlett Packard
Enterprise Support.
Table Continued
Viewing the storage configuration 129