Adding A Capacity Threshold Alert; Modifying A Capacity Threshold Alert - HPE StoreOnce 6500 User Manual

Adding a capacity threshold alert

Procedure
1. On the Capacity Threshold Alerts page, click Add.
2. On the Capacity Threshold Alerts window, select the appliance (local or registered remote) to
monitor.
3. Select the node and couplet to monitor.
4. Select the threshold.
5. This threshold is the percentage of physical capacity used at which you want to receive the first email
alert.
6. Select the configured alert type.
7. The alert type is the alert type (Info, Warning, Critical) at which you want to receive an email alert.
The system defines Warning at 85% capacity used and Critical at 95% capacity used.
8. Select the alert frequency.
9. The alert frequency is the frequency at which you want to receive an email alert indicating the
capacity used. However, if your system reaches the defined threshold before the frequency is
reached, you will receive an email. For example, if your frequency is every three hours but your
capacity used increases by 10% in two hours, you will receive an email alert at two hours instead of
three.
10. Enter the email address of all who should receive the email alerts.
11. Leave "Continue to create this alert configuration" checked.
12. If your appliance does not have email configuration enabled, after the threshold alert is configured
you will be directed to Device Configuration > Email to enable email configuration. The threshold
alert is not active until you have enabled email configuration.
13. Click OK.
14. The alert is displayed on the Capacity Threshold Alerts page.

Modifying a capacity threshold alert

Procedure
1. On the Capacity Threshold Alerts page, select the threshold alert to modify.
2. Click Modify.
3. On the Edit Capacity Threshold Alerts window, edit the information as needed.
4. Click OK.
5. The updated alert is displayed on the Capacity Threshold Alerts page.
Adding a capacity threshold alert 155