Access And Device Configuration; Device Configuration Page; Firmware Page; To View And Upgrade Firmware - HPE StoreOnce 6500 User Manual

Access and Device Configuration

NOTE:
In this context, Device refers to the StoreOnce System, not the target devices on the system.

Device Configuration page

On the Device Configuration page, System Information shows summary details for the StoreOnce
System that were set up at installation and cannot be modified from the GUI.
Table 46: System information
Field
System ID
Description StoreOnce System

Firmware page

Select the Firmware page to view the firmware versions for hardware components, and to update
firmware versions if required.
The Firmware page contains the following tabs:
• Server: Contains hardware components for the server.
Details are displayed for all nodes (servers) in the cluster.
• Storage: Contains hardware components for all storage elements.
Details are displayed for all storage in the cluster.
• Switch: Contains hardware components for all switches, two in a one-rack system and four in a two–
rack system.
The tabs are empty when the page is first displayed and no information will be present until a scan has
been initiated.

To view and upgrade firmware

166 Access and Device Configuration
Description
This is system ID assigned at installation. It is
referred to as the Cluster ID in the StoreOnce CLI.
For information about locating the system serial
number, refer to License management on page
188.
This text is used to label and identify the
StoreOnce System. It is set by the user with the
StoreOnce CLI system set description
command.