Appliance Throughput Reports; Stream Count Reports - HPE StoreOnce 6500 User Manual

Status
Unknown
Non-Replicating
Pending synchronization

Appliance throughput reports

NOTE: The time zone of the report is shown on the upper right of the screen.
When the Appliance/Virtual Device is in the UTC time zone, the custom time period selection will use the
browser time zone from where you are accessing Reporting Central.
To obtain an appliance throughput report:
Procedure
1. On the Reports page, select Appliance.
2. In the Groups menu, you will see all available appliance groups that have been registered for
reporting. Select All Appliances, or select an appliance group.
3. In the Appliance menu, select the specific appliance you want to run a report for.
4. Select the devices you want to include in the report. The default (if you make no selection) includes all
devices. To select up to five specific devices, click Select Device, select the devices you want to
include, and click OK.
The resulting graphs show data points for the selected time period, with time and date stamps on the x
axis, and throughput on the y axis. The upper graph shows throughput for the selected devices. The
lower graph shows the throughput for replication sources or targets (VTL or NAS devices) or inbound
and outbound copy jobs (StoreOnce Catalyst). To the right of each graph, the selected devices and
device names will be shown. The lower graph will also show labels for source, target, inbound, or
outbound copy job information.
You can export the graphs; see Exporting Reporting Central reports on page 147 for details.

Stream count reports

The Stream Count report allows you to view data about the active streams running on your system. You
can select a specific device to view stream count data for, or if you do not select a device, the report will
show data for all device stream counts by default.
Procedure
1. In the Navigator, select Reporting Central, and then select Reports.
2. Select the Stream Count tab. The Group menu will default to All Appliances (you do not need to
change this).
Status label
Unknown
Information needed
OK
Warning
Critical
Icon(s) associated with status
Appliance throughput reports 151