Status Page - HPE StoreOnce 6500 User Manual

Field
Warranty Serial Number This is the HPE serial number of the purchased product. See the following
Warranty Product
Number
More about warranty serial numbers
These systems have a separate entry for each couplet. The warranty product number depends upon
which couplet it is; Couplet 1 and Couplet 3 have different warranty product numbers. Couplets 2 and 4
have the same warranty product number. The warranty serial number is always unique.
The warranty serial number for Couplet 1 covers Node 1 and Node 2 servers, base storage, and the
switches in Rack 1.
The warranty serial number for Couplet 2 covers Node 3 and Node 4 servers and base storage.
The warranty serial number for Couplet 3 covers Node 5 and Node 6 servers, base storage, and the
switches in Rack 2.
The warranty serial number for Couplet 4 covers Node 7 and Node 8 servers and base storage.
If additional disk packs have been installed in any couplet, there will be a separate entry for each disk
pack that identifies the couplet and expansion number, such as Couplet1Expansion1. This is for
information only; disk packs do not carry warranty details (the warranty columns will show Not
Applicable).

Status page

The Status page displays the Remote Support availability status of the proxy and enterprise servers,
indicates if the product models and hardware product numbers have been entered, and indicates if the
device is registered successfully.
• An "I" icon indicates an informational message
• A yellow triangle "!" icon indicates a warning message
• A red circle "X" icon indicates an alert message.
Description
"More about warranty serial numbers" for more information. The WSN might
be populated automatically from the BIOS.
NOTE: There will be up to four warranty serial numbers, one for each
couplet.
This is the product number of the purchased product. The WPN is in a 6-
character format that matches one of the StoreOnce product names and
might be populated automatically from the BIOS.
Status page 219