HPE StoreOnce 6500 User Manual page 180

Procedure
1. From the Navigator, select Device Configuration > SNMP.
2. Select the trapsink from the SNMP Trapsinks list.
3. View additional details about the selected trapsink in the Trapsink Details pane at the bottom of the
GUI page.
Table 51: SNMP Trapsinks parameters
Name
Trapsink Address
Version
Port
State
Table 52: SNMP Trapsink Details parameters
Name
Trapsink Address
Version
Port
State
Community (version 1 and
2 only)
User Name (version 3
only)
Auth Algorithm (version 3
only)
Priv Algorithm (version 3
only)
Context Name
180 Access and Device Configuration
Description
The IP address of the host that is to receive SNMP traps.
The version of the trapsink (1, 2, or 3).
The port number of the host.
The state of the trapsink (off, on).
Description
The IP address of the host to receive SNMP traps.
The version of the trapsink (1, 2, or 3, default is 1).
The port number of the host.
The state of the trapsink (off, on).
The community string can be set by the network manager (default is
public).
The user name assigned to this trapsink.
The user authentication algorithm used to authorize messages sent or
received on behalf of the listed user (MD5 or SHA, default is MD5).
Optional.
The SNMP version 3 privacy algorithm used to encrypt messages sent
or received on behalf of this user (DES or AES, default is DES).
Optional.
The name of the SNMP context. (SNMP context is a collection of
management information accessible by an SNMP entity.) Optional.