Scanning For Storage; Viewing The Cloud Bank Storage - HPE StoreOnce 6500 User Manual

Name
Red Cross/Critical -
Error – Controller
Missing, failed
Red Cross/Critical -
Error – Invalid RAID
configuration
Red Cross/Critical -
Error – Incorrect
expansion order
Red Cross/Critical -
Error – Missing
Expansion

Scanning for storage

To check for newly attached storage expansions or view the current storage configuration you need to
scan the appliance's attached storage.
Procedure
1. Click Storage in the Navigator pane. Select the Storage Configuration tab.
2. An Information dialog box will appear that tells you to click Scan for Storage. Click OK.
3. Click Scan for Storage. You will see a storage scan in progress message. The scan can take up to 5
minutes.
4. The storage expansion configuration will be shown.
5. If no new storage expansions have been connected, you will receive a Warning dialog box saying that
no additional storage devices were found. If this is unexpected, check cables and the power state of
attached devices and try the scan again.

Viewing the Cloud Bank storage

Procedure
Navigate to the Storage > Cloud Bank tab.
Description
This error will be reported if the RAID controller or SAS Storage Controller
that is connected (or is primary controller) for the storage expansion has an
error or is missing. This error requires manual intervention to correct the
hardware issue that is causing the problem.
This error is reported if a RAID volume is detected but it is of the incorrect
configuration for use as a StoreOnce storage volume (for example, the wrong
size, RAID level, stripe-size). This error is accompanied by a Delete button to
enable the specific volume to be deleted.
In this case, a valid storage volume has been identified, but the order of
storage expansions is incorrect and there is no expansion detected in a lower
order expansion location.
Appliances where expansions must be added in pairs across both storage
clusters the disks/enclosures for one half of the expansion pair is missing.
This error requires physical intervention to add the missing expansion, or
move storage such that it provides a valid configuration of expansion.
Scanning for storage 133