Storage Controller Options - HPE ProLiant ML110 Gen11 User Manual

13. Make sure that all the system cables that are routed through the front cable channel are properly secured in the metal cable tabs and
cable clamps.
14. Install the riser cage.
15. Install the system air baffle .
16. Install the access panel .
17. Do one of the following:
Orient the server back to tower mode.
Install the server into the rack.
18. Connect all peripheral cables to the server.
19. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
20. Power up the server.
Results Results
The installation is complete.

Storage controller options

Storage controller options
The server supports the following storage controllers:
Intel VROC for HPE Gen11 (Intel VROC)—Provides enterprise-level hybrid RAID support for direct attached SATA and NVMe SSD .
HPE MR type-o and type-p Gen11 controllers
For more information on drive array and storage controller configuration, see Configuring storage controllers.
HPE ProLiant ML110 Gen11 Server User Guide 122