HPE StoreOnce 6500 User Manual page 198

Table 60: Optional Hardware messages
Message
No optional hardware fitted
Valid hardware with valid license
Failed hardware found
Unlicensed hardware found
Invalid hardware found (license
mismatch)
Hardware reported as degraded
Hardware missing
Card installed in wrong location
Hardware mismatch
Hardware reporting as failed
198 Access and Device Configuration
Description
No optional hardware fitted
The hardware is valid and
licensed
There is a valid license but the
hardware is in a failed/degraded
state
The hardware is valid but
unlicensed
The hardware is valid but does
not match the license
The hardware is reported as
degraded
The hardware is missing
The card has not been installed
in the correct PCI-E slot.
Hardware configuration mismatch Verify that the cards were loaded
Hardware is in a failed state
Recommended action
Verify that the card has been
installed properly. See the
StoreOnce System Installation
and Configuration guide
for your product.
No action required.
Contact Hewlett Packard
Enterprise Support.
Verify that the Optional Hardware
has been licensed as described
in Validating new licenses and
updating controller card status
on page 195.
Contact Hewlett Packard
Enterprise Support.
Contact Hewlett Packard
Enterprise Support.
Verify that the card has been
installed properly. See the
installation and configuration
guide for your product.
Verify that the cards were
installed in the correct order. See
the StoreOnce 10GbE Network
Card and Fibre Channel Card
Installation and Configuration
guide.
in the correct order. See the
StoreOnce 10GbE Network Card
and Fibre Channel Card
Installation and Configuration
guide.
Contact Hewlett Packard
Enterprise Support.
Table Continued