Getting Started; The Storeonce System Management Console; Storeonce Graphical User Interface (Gui) Components - HPE StoreOnce 6500 User Manual

Getting started

The StoreOnce System Management Console

The StoreOnce System GUI and CLI together make up the Management Console.
The online help and the StoreOnce System user guide describe how to use the StoreOnce System GUI.
The StoreOnce Command Line Interface (CLI) provides an alternative way of administering and
monitoring the system. Some tasks are only accessible from the StoreOnce CLI. StoreOnce CLI
commands require an SSH client application (freely available from the internet) and must be run from an
SSH terminal session. The StoreOnce System CLI Reference Guide describes how to use the StoreOnce
System CLI commands.
Supported browsers
The StoreOnce Management GUI is supported on the following web-browsers:
• Internet Explorer 9, 10, and 11 (note that Internet Explorer 8 is not supported and some StoreOnce
features will not work)
• Mozilla Firefox v23 and above, and Firefox ESR24
NOTE: The TLS protocol version 1.0 is no longer supported. You must manually enable TLS 1.1 or 1.2 in
your browser to access the StoreOnce GUI.

StoreOnce Graphical User Interface (GUI) components

NOTE: The web browser being used to communicate with the StoreOnce System must have Active
Scripting or JavaScript enabled. If it does not, some of the browser buttons may not be displayed.
After 15 minutes of inactivity, the session times out and returns to the Login screen.
The GUI includes:
Getting started 11