Deleting A Virtual Device Group; Removing A Device From A Device Group - HPE StoreOnce 6500 User Manual

If you want to include all shares in your reports, click >>. To remove a share, click the specific library
and click < to move the share out of the Selected Shares list. You can also use << to move all items
out of the Selected Shares list.
3. Click Next.
Adding or modifying StoreOnce Catalyst stores
To select the StoreOnce Catalyst stores to be included in your group:
Procedure
1. In the Catalyst Stores screen of the Create New Group wizard, select the stores you want to include
in your group. You will see the appliance name or address that is associated with each store.
2. For StoreOnce Federated Catalyst stores, you will see two to eight entries (depending on the number
of members participating in this Federated Catalyst store), one for each service set.
3. To add a store, click the store and then click > to move the store to the right pane, Selected Catalyst
Stores.
If you want to include all stores in your reports, click >>. To remove a store, click the specific store and
click < to move the store out of the Selected Catalyst Stores list. You can also use << to move all
items out of the Selected Catalyst Stores list.
4. Click Finish. You have completed creating or modifying your virtual device group.

Deleting a virtual device group

Procedure
1. On the Device Groups page, in the upper pane, select the group you want to delete.
2. In the Delete Device Group dialog box, verify that you have selected the correct device group.
3. Click OK. This group will no longer be available for use in running reports.

Removing a device from a device group

After you unregister an appliance, the devices related to that appliance may still appear on the Device
Groups page in any device groups they were added to. Their status will display as Unable to connect. In
addition, the User Data Stored and Size on Disk columns will display "—". You must manually remove
devices related to an unregistered appliance from configured groups.
IMPORTANT:
In order to identify the devices that need to be removed, you will need to log in to the remote
appliance that you unregistered, and note which devices are related to this appliance.
To remove a device from a device group:
Procedure
1. On the Appliance Groups page, check that the appliance you unregistered is no longer listed.
2. Click Virtual Devices.
3. Click Modify.
146 Deleting a virtual device group