Contents Of The Configuration Text File; Settings Restored After Automatic Recovery - HPE StoreOnce 6500 User Manual

IMPORTANT:
Configuration files saved on older versions of the software are not usable after the software is
updated.

Contents of the configuration text file

The configuration text file contains information required to reconfigure some appliance settings; it details
the commands that need to be sent via the StoreOnce CLI interface or the steps required in the GUI to
apply the settings.
The text file contains the configuration details for the following settings:
• User Accounts: The user accounts and account type settings and the StoreOnce CLI command
required to create these accounts are provided. Passwords are not provided in the text file for security
reasons. Only custom accounts are provided, the default Admin and Operator account settings are not
included in the file.
• Network: StoreOnce CLI command information is provided to allow the user to reapply network
settings for 1GbE and 10GbE network configurations.
• Time and Date: This includes NTP server and timezone settings for the appliance.
• SNMP Trap: SNMP trap users, trapsink and version configuration settings are provided in the form of
StoreOnce CLI commands that must be issued to re-configure the SNMP trap configuration.
• Email Alerts: Configuration settings for email servers, and registered email addresses with their event
levels are provided so that these settings can be re-entered via the GUI.
• Licenses: License keys for capacity expansion, replication and StoreOnce Catalyst are provided in
the text file along with the command syntax for re-entering the license keys.
• Remote Support: The settings established for Remote Support.
• Customer Information: The contact information of the person contacted when Remote Support
indicates that a support case is needed.
IMPORTANT: To restore any of the above settings, do so BEFORE performing the automated
portion of the restore, otherwise some settings will not be restorable using the automated process.
Under each section, a list of CLI commands (if available) or instructions to restore the Device
Management settings are listed.

Settings restored after automatic recovery

The following configuration settings are restored by uploading and applying the configuration zip file
through the CLI:
• Virtual Tape Library:
All configuration settings for the virtual tape library device are restored, namely:
◦ Emulation type of library
◦ Number of cartridge slots
◦ Number and emulation type of drives
228 Contents of the configuration text file