Firmware Page Fields; User Management - HPE StoreOnce 6500 User Manual

Before you reboot, you will be directed to the Maintenance page. Click Disable Failover. Then
click Reboot. Your system will be rebooted.
• Power cycle required (cold boot): A power cycle, or cold reboot, is a physical power cycle of the
appliance. The system must be shut down for at least 60 seconds before you power back on.
◦ In the Success notification box, you will see a message asking you to do a power cycle. Select
OK.
◦ In the Do you want to do power cycle box, select Yes to power cycle immediately. If you
select No, the next time you log in to the GUI, you will be asked again if you want to do a power
cycle.
◦ To power back on, you will need physical access to the appliance or access to the iLO
management GUI.

Firmware page fields

Table 47: Firmware fields
Field
Checkbox
Device Type
Active Version
Qualified Version
Recommended Action
Status

User Management

Two user accounts, Admin and Operator, are created with passwords at installation and are always
included on this page. Administrators can modify the passwords. Administrators can also create, edit, and
delete other users. (See also User roles and types on page 169.)
User accounts and AD
168 Firmware page fields
Description
Allows selection of individual components
The name of the component
The firmware version on the component
The firmware version that is qualified for use with the StoreOnce System. If a
component has been replaced, this may be earlier than the active version.
The recommended action, which may be none, upgrade or downgrade
The status, which changes if an update is in progress or further action is
required to complete the update process