Events; Events Tab Parameters - HPE StoreOnce 6500 User Manual

Events

Select Events in the Navigator to display each Alert, Warning, Information, and Audit message generated
by the Management Server.
The Events page contains two tabs, Events and Settings:
• EventsFunctions available on the tab:
◦ To understand parameters on the Events tab: Events tab parameters on page 222
◦ To filter and search through events: Filtering and searching for events on page 223
◦ To acknowledge events in order to hide them from the Events log: Acknowledging events on
page 224
◦ To define how long events are kept before being deleted from the log: Deleting events from the
log on page 225
◦ To export the Events log to a CSV file: Exporting the events log on page 225
• Functions available on the Settings tab:
◦ To enable or disable Remote Event Suppression mode: Remote Event Suppression on page 225

Events tab parameters

On the Events tab, the following categories of events are displayed:
• Alerts: Disruptive events that can result in loss of access to data.
• Warnings: Potentially disruptive conditions in which access is not lost, but if the situation is not
addressed, it can escalate to an Alert condition; for example, reaching a very high server CPU
utilization or approaching a quota limit.
• Information: Events occurring under normal or non-threatening conditions that change the system.
• Audit: Actions taken by users on the system such as logging in, rebooting, adding storage, creating
libraries, editing NAS shares, modifying the network, etc. This includes actions taken through the GUI
and through CLI.
NOTE: Events are cluster-wide.
Table 67: Events log columns
Name
Level
Time
222 Events
Description
The icon in the Level column displays the severity of the event. (Information and
audit events use the same icon.) This column is sortable by severity type.
The time that the event originated on the Management Server. Click on the column
heading to sort in ascending or descending order.
Table Continued