Storeonce System Models - HPE StoreOnce 6500 User Manual

StoreOnce System models

Table 6: Overview of StoreOnce Systems
Model
StoreOnce
6500 System
StoreOnce
6600 System
16 StoreOnce System models
Base Storage Capacity
Each couplet consists of
two server nodes and two
disk enclosures, each with
an initial 44 TB of
preconfigured storage
Each couplet consists of
two server nodes and two
disk enclosures, each with
an initial 44 TB of
preconfigured storage
Storage Expansion
Options
There are two options for
expanding storage:
• StoreOnce 6500 System
Capacity Upgrade Disk
Pack:
The StoreOnce 6500
System (88 TB)
Capacity Expansion kit
is a pack of twenty-two 4
TB disks, which are
added to the original
disk enclosure
A maximum of five of
these kits can be used
with the first enclosure
until all disk bays are
full.
• StoreOnce 6500 System
Capacity Upgrade
Enclosure with Disks:
Once all bays in the disk
enclosure are full, it is
possible to add a
couplet to your
StoreOnce 6500
System.
This task is performed
by Hewlett Packard
Enterprise service
engineers.
There are two options for
expanding storage:
• By adding disks to both
disk enclosures in a
couplet (StoreOnce
6600 System 88 TB
Capacity Expansion):
This expansion kit
contains twenty-two 4TB
Optional Hardware
Not supported
If adding a StoreOnce 6600
couplet to a 6500 cluster, 2
x 8 Gb Fibre Channel cards
must be installed in the
Optional Hardware PCI-E
slots of each node of the
StoreOnce 6600 couplet.
Supported
Two PCI-E slots in each
server in a couplet available
for Optional Hardware
(these slots must be
installed in pairs and you
must install the same type
in each server in a couplet):
– 10 GbE SFP Network
cards