Deleting Or Disabling An Ntp Server Configuration; Optional Hardware - HPE StoreOnce 6500 User Manual

4. Click OK.
The screen expands to include an NTP Server section.
5. Click Add.
6. In the Add NTP Server window:
a. Select the NTP server type: IPv4, IPv6, or Fully Qualified Domain Name.
b. Add the chosen NTP server address.
7. Click OK.
If the supplied NTP server address is reachable from the StoreOnce appliance, the address will be
added to the NTP configuration and NTP time correction will be enabled.
NOTE: There is no check that the NTP server is reachable after it is added to the configuration.
8. In the confirmation dialog box, click OK.
If the NTP time is behind the currently configured time on the appliance, you will see a warning dialog
box that reminds you to reboot the system using the system reboot command, and that system
time will move backward as a result of that command.

Deleting or disabling an NTP server configuration

Procedure
1. Select that row that contains that configuration in the NTP server table.
2. In the title bar, click Delete.
3. In the confirmation dialog, click Yes.
4. To disable the NTP configuration entirely, uncheck the NTP selection enabled box.
You can now manually set the date and time from the Time and Date GUI page; see Changing the
date and time.

Optional hardware

Optional hardware configuration is available for supported StoreOnce Systems running StoreOnce
software version 3.14.0 and later.
When you order a base configuration for your StoreOnce model, you can specify the following additional
hardware:
• Network cards
• Fibre Channel cards
• Memory modules
The optional hardware can be installed either in the factory or at a later date in the field. All optional
hardware must be licensed and added to the base configuration before it can be used.
The Optional Hardware page allows you to view new and existing optional hardware, the status of
licenses on your installed optional hardware, and any errors that exist that may prevent license activation.
194 Deleting or disabling an NTP server configuration