Viewing Details For Currently Configured Licenses; Controller Card Status Fields - HPE StoreOnce 6500 User Manual

In the Validate Configuration box, you will see a list of installed optional hardware. If new controller
cards been added and have licenses that are ready to be activated, the Slot Message column will
show Ready to License.
A single row displays the optional DIMM license status regardless of the number of optional DIMMs
installed.
5. An In Progress message will appear. If the licenses have been properly mapped and applied to the
hardware, a Success message will appear. Click OK.
6. If the licenses do not validate, the hardware cannot be activated. A failure message will appear.
Correct the error condition and then return to the Optional Hardware page and try again to validate.
The hardware monitoring will restart (and the GUI will be updated), which takes up to five minutes.

Viewing details for currently configured licenses

Procedure
1. In the Navigator pane, select Optional Hardware.
2. An Information box will notify you that if any licenses have been added, you need to validate them
from this page in order to update the controller card status information. Click OK.
3. In each controller card entry there is a License column. Cards with currently activated licenses will
have a Details hyperlink in the License column. Click Details.
4. View the name, description, valid from date, expiration date, key, and license type. Click OK when you
are finished.

Controller card status fields

The StoreOnce 6500 and 6600 System will have multiple tabs containing Controller card status, one for
each couplet. You will also see Node, Couplet, and Cluster messages on the Optional Hardware page.
Table 59: Controller card status fields
Field
Slot
Controller
196 Viewing details for currently configured licenses
Description
Shows the slot where the PCI-E controller card is located.
This field is also present in the Validate Configuration dialog box.
Describes the type of controller card in the slot. For example, a network
expansion card, or a fibre channel expansion card.
This field is also present in the Validate Configuration dialog box.
Table Continued