Disconnecting Cloud Bank Stores - HPE StoreOnce 6500 User Manual

is used is released from the Cloud Bank Storage Read/Write Capacity. The newly available Read/Write
Capacity is available for new or existing Cloud Bank Storage stores.
Prerequisites
• Only administrators can detach Cloud Bank stores.
• The Cloud Bank store must be Read Write.
Procedure
1. Navigate to the StoreOnce > StoreOnce Catalyst > Stores > Catalyst Store Details tab.
2. Select the Cloud Bank Catalyst store.
3. Click Detach.
4. Click Confirm.
IMPORTANT: When you detach a Cloud Bank store from a StoreOnce System:
• If the store is encrypted, be sure that you have exported the Encryption Key before detaching.
The key is required for Connect (Read Only) on another system.
• Detaching is only possible if there is enough Detach Capacity licensed on the StoreOnce
System.
• Once detached, Connect (Read Write) is no longer possible. No further data can be written to
this store from a StoreOnce System. However, the bucket/container permissions in the cloud
service provider remain unchanged.

Disconnecting Cloud Bank stores

Disconnecting a Cloud Bank store removes the store from a StoreOnce System and leaves the data in
the cloud in a read/write state. This allows a Cloud Bank store to be migrated between StoreOnce
systems or used to test Connect functionality.
Prerequisites
• Only administrators can disconnect Cloud Bank stores.
• The Cloud Bank store must be Read Write.
Procedure
1. Navigate to the StoreOnce > StoreOnce Catalyst > Stores > Catalyst Store Details tab.
2. Select the Cloud Bank Catalyst store.
3. Click Disconnect.
4. Click Confirm.
102 Disconnecting Cloud Bank stores