Adding A Client - HPE StoreOnce 6500 User Manual

Procedure
1. Navigate to the StoreOnce > StoreOnce Catalyst > Bandwidth Limiting Windows tab.
2. Check the General Limiting Enabled box and determine the recommended general bandwidth limit,
which is a simple calculation of:
(Max WAN Speed) x (Max Desired WAN Usage%)
Use the bandwidth limit calculator provided on this page to work out limit values, if required.
3. Click Edit.
You can configure up to two windows for each day.
Verify the appropriate Apply First/Second Restriction check boxes are checked to ensure that the
specified times are enabled. If not checked, the times are ignored. Then manually enter the required
Bandwidth Limit in each required window.
NOTE: Start and End of Restriction times are set and displayed in UTC regardless of the selected
local time zone so adjust accordingly. For example, U.S. CDT (Central Daylight Time) is five hours
behind UTC. If you are in CDT and want a Start of Restriction time of 6:00 p.m., set the start time to
23:00 (instead of 18:00).
All settings are applied to the StoreOnce System and not for individual jobs. The Bandwidth Limit
windows override the General Limit when the time specified for the window is active. The General
Limit applies outside of Bandwidth Limit windows.
4. Click Apply.

Adding a client

You can create a list of clients (backup application client identifiers) that will be displayed on the
Permissions tab to restrict client access to a store.
NOTE: The client backup application must first be configured with a client identifier before you can add
client details. See the client backup application documentation for more information about configuring
identifiers.
Prerequisites
Only an administrator can add and edit StoreOnce Catalyst clients.
Procedure
1. Navigate to the StoreOnce > StoreOnce Catalyst > Clients tab.
2. Click Add.
3. Enter the name of the client and a description.
NOTE: The client application must be configured with a client identifier, such as MediaServer1. This
identifier is entered in the Client field (no spaces are permitted).
4. Check the features that you desire (if they are supported by the client application):
82 Adding a client