Current Network Configuration; Factory Default Network Configuration; Custom Network Configuration List; To Add A Custom Network Configuration - HPE StoreOnce 6500 User Manual

Current Network Configuration

This page shows the current network configuration. This is the active configuration and cannot be
edited. However, the current configuration is a copy of the last activated configuration; the original
remains (unlinked) and can be modified.
The current configuration page has two tabs.
• Configuration shows the settings that have been applied to the configuration by the user.
• Status shows the actual settings that are reported based upon that configuration.
This page contains the following main sections: DNS server details, Port Sets, Subnets, and Encryption
Links. There are no actions available from this page and the configuration is always Protected. For a
detailed description of all fields, see To add a custom network configuration on page 205.

Factory Default Network Configuration

This page shows the factory default network configuration. This is the configuration that was on the
system when it was initially supplied and it cannot be edited. The page is for information only. If you return
the system to factory defaults (by running a quick restore), this configuration will be restored.
This page contains the following main sections: DNS server details, Port Sets and Subnets. There are no
actions available from this page and the configuration is always Protected. For a detailed description of
all fields, see To add a custom network configuration on page 205.

Custom Network Configuration List

Select the Custom item in the Network Configuration section of the navigation pane to display a list of
all custom network configurations that have been created by the user, showing the Name and
Description. Select a configuration using the checkbox on the left-hand side and use the buttons at the
top of the window to perform these actions:
NOTE: Some actions can be performed on multiple configurations at the same time.
• Activate:Click this button to activate the selected custom network configuration. If the action is
successful, the selected custom network configuration will become the current configuration.
NOTE: It is not possible to activate a new configuration if storage addition is in progress.
• Delete: Click this button to delete the selected custom network configuration(s).
• Edit: Click this button to edit the selected custom network configuration.
• New: Click this button to create a new custom network configuration.
NOTE: If a configuration is Protected, you cannot delete it until you use the Edit function to disable the
Protected checkbox.

To add a custom network configuration

The following steps provide an overview of the process that is valid for both the StoreOnce GUI and
StoreOnce CLI.
Current Network Configuration 205