Adding An Snmp User; Modifying An Snmp User - HPE StoreOnce 6500 User Manual

Name
Priv Algorithm
Priv Password

Adding an SNMP user

Procedure
1. From the Navigator, select Device Configuration > SNMP.
2. Select the SNMP Users tab.
3. Click Add.
4. Enter the authorized user name.
5. Select the group name this user belongs to.
6. The default is noAuthNoPrivGroup.
7. If you selected authNoPrivGroup or authPrivGroup, the window expands to display additional fields.
a. Select the Auth Algorithm.
The default is MD5.
b. Enter the Auth Password.
c. Select the Priv Algorithm.
The default is DES.
d. Enter the Priv Password.
8. Click OK.

Modifying an SNMP user

Procedure
1. From the Navigator, select Device Configuration > SNMP.
2. Select the SNMP Users tab.
3. Select the user to modify.
4. Click Modify.
5. In the Modify User window, edit the Group Name.
You cannot modify the User Name.
6. Click OK.
Description
This optional parameter identifies the SNMP version 3 privacy algorithm
used to encrypt messages sent or received on behalf of this user (default
is DES).
This optional parameter specifies the privacy password for SNMP version
3 and decryption (default is no password set). Passwords must contain at
least eight characters.
Adding an SNMP user 183