Acknowledging Events - HPE StoreOnce 6500 User Manual

c. When editing the time, overwrite each unit of time individually leaving the colons between them
intact; do not overwrite the entire time stamp.
d. Search Text can only be used for event messages.
Table 69: Custom Search for Events parameters
Name
Event Code Filter
Search Text
Level
Event Type
Start Date
End Date
NOTE: The Custom Search option is for English language GUIs only; the option is disabled in
localized GUIs.

Acknowledging events

Using the Acknowledge events feature, you can hide events in the Events log without having to delete
them. You may want to do this to ensure that you are seeing the latest and most relevant messages when
you log into the GUI and open the Events page. Once you acknowledge an event, it is hidden from view
unless you use the Acknowledged Only events filter when searching for events.
For example, if the Events log contains multiple fs is full events, and you know you have attended to this
issue, you can "acknowledge'" these events, and when you log to the GUI the next day and you see
another fs is full message, you will know that you are seeing the most current event status instead of an
outdated message.
To acknowledge an event or events:
Procedure
1. In the Events log, select the checkboxes of any item(s) you would like to acknowledge. You can select
multiple checkboxes at once.
2. Click Acknowledge.
3. You will see a warning message asking "Are you sure you want to Acknowledge the selected
events?"
4. Click Yes.
224 Acknowledging events
Description
Specific event codes are assigned to specific types of events. Enter the code
you want to search for.
Enter a partial string, for example, IP address. You cannot use "*" as a
wildcard; the search looks for that specific character. This field is not case-
sensitive. Search text can only be used for event messages.
Select the level of event, Alert Only, Warning Only, or Info Only.
Select the event type, System or Audit.
Use the calendar icon to select a date. The time defaults to 00:00:00 (the
beginning of the day) and is editable.
Use the calendar icon to select a date. The time defaults to 00:00:00 (the
beginning of the day) and is editable.