Filtering And Searching For Events - HPE StoreOnce 6500 User Manual

Name
Event type
Event code
Event
The Event Details pane at the bottom of the page provides more specific information about the selected
event.
Table 68: Event Details
Name
Severity
Sequence ID
Event code
Message
Root Cause
Recommended
Action

Filtering and searching for events

You can scroll through all events pages by using the First, Prev, Next, or Last buttons.
To search for a specific type of event:
Procedure
1. Select an event type by using the drop-down filter at the bottom of the Events log. All Events is the
default selection.
2. You can also filter by Alert Only, Warning Only, Info Only, Audit Only, Acknowledged Only, or
Custom Search. All selections except for Custom Search will return a list of events categorized by
the selected filter.
3. If you select Custom Search, fill out some or all of the parameters in the Custom Search for Events
window, and then click OK.
a. To search today's events, select today as the start date and do not include an end date.
b. To search for one specific day, select that day as the start date and select the next day as the end
date; the times default to 00:00:00 and therefore this will only include the start date.
Description
The type of event (Audit or System).
The event code is a unique error code assigned to that particular event (for
example, all log in events will have the same error code).
The text of the event, including details and suggested actions. This column is not
sortable.
Description
The level of event severity (Alert, Warning, or Info).
The unique ID given to that event.
The unique code assigned to the event for support identification.
This is the same information as provided in the Event column in the Events log.
The initial trigger for the event. This is only shown when the root cause is
available.
Provides a direct action to take for problem resolution. This is only shown when a
recommended action is available.
Filtering and searching for events 223