Deleting A User Or Group (Administrator Only); User Interface; Ssl Certificates - HPE StoreOnce 6500 User Manual

Procedure
1. Select the appropriate external user or group.
2. Click Modify.
3. Change the permissions role.
4. Click OK.
A confirmation window opens.
5. Click OK.

Deleting a user or group (administrator only)

IMPORTANT: You cannot delete the two default user accounts: Administrator and Operator.
Procedure
1. Select the user or group and click Delete.
2. Click OK to confirm deletion of the selected user or group.
3. In the success confirmation box, click OK.

User Interface

The User Interface page allows you to change the GUI Session Idle Timeout, which is the amount of time
(in minutes) the GUI can remain idle until it times out and requires another login.
To change this setting:
Procedure
1. Click Modify to open the User Interface window.
2. Select the number of idle minutes that triggers the timeout. The options are 1, 2, 5, 10, 15 (default),
30, and 60.
3. Click OK. The GUI session idle time will take effect the next time you log in. Your current session will
still have the previous idle time.

SSL certificates

The StoreOnce Management GUI is accessed via the HTTPS protocol which requires the exchange of an
SSL (Secure Sockets Layer) certificate to authenticate the connection between web browser and the
StoreOnce appliance. The StoreOnce appliance by default will return a generic SSL certificate which is
created when the system is manufactured. This generic certificate does not uniquely identify the
appliance, and therefore is not considered to be secure by the web browser.
The user has the option to change the SSL certificate to provide a better level of authentication. The
following options are available:
172 Deleting a user or group (administrator only)