Appliance Status Reports - HPE StoreOnce 6500 User Manual

Appliance status reports

NOTE: Devices and service sets (nodes) in the Unknown state do not contribute to the file system usage
total, the bar graphs, or the deduplication ratio shown on this page. Devices in Fault or Failed to Start
states do contribute to these reported values.
To view the status report for an appliance:
Procedure
1. On the Reports page, select Appliance.
2. In the Groups menu, you will see all available appliance groups that have been registered for
reporting. Select All Appliances, or select an appliance group.
3. In the Appliance menu, select the specific appliance you want a report for. This field is populated with
the appliances that are in the appliance group you chose in the previous step.
4. Click the + next to Appliance in the lower portion of the page. You will see a report for the appliance
you have selected.
Data type
Overall Health Status
File system usage on
Appliance
Storage Usage in Cloud Used space and free space in the cloud in GB, and a graphic showing
Deduplication device
usage
148 Appliance status reports
Description
Status of appliance health:
• Running: All services, including background services, are running.
• Online: System is idle and can be used any time.
• Unknown: Appliance registration has not been completed.
• Unable to connect: A connection to the remote appliance cannot be
made. This could be due to the remote appliance rebooting or shut
down, network connectivity issues or invalid credentials.
• Fault: Appliance is in a fault condition
Used space and free space on the appliance in GB, and a graphic showing
each as a percentage of the whole file system
each as a percentage of the whole cloud system
Deduplication ratio, size of user data stored, size on disk, and size in the
cloud
Table Continued