Deleting Configuration Files From An Appliance - HPE StoreOnce 6500 User Manual

config restore devices <config_filename>
This will restore device settings for all of the nodes in the cluster.
3. After configuration, recovery backups can be configured and replication mappings re-established in
order to reverse replicate data back to the appliance (see the replication information).
NOTE: To restore network or other device management settings use the procedure described in the
following section. It is also the procedure you use after a QR.
WARNING: QR is a complete re-image of the device and is only used for catastrophic issues or
major software updates where compatibility cannot be maintained.

Deleting configuration files from an appliance

The saved configuration files remain on the StoreOnce appliance after creation and after a recovery
operation. They can be safely left on the appliance or can be identified and deleted using the following
StoreOnce CLI commands:
config show list
config delete <config_filename>
Deleting configuration files from an appliance 231