HPE StoreOnce 6500 User Manual page 113

Field
Source Appliance
Source Store
Source Item Name The name of the source item. All item names are defined by the backup
Client Identifier
Queued Time
Started Time
Stopped Time
4. Click on an item within a list to display further details about it in the lower part of the page.
Table 37: Inbound copy job fields
Field
Item Name
Status
Status Information This will be a — unless the job has been cancelled or paused.
Percent Complete
Client Identifier
Client Address
Application
Identifier
Description
The address of the source appliance.
The source is the Service Set on the StoreOnce System from which the job is
being copied to a Service Set on this StoreOnce System.
The name of the source store for the inbound copy job.
application.
The client that initiated the inbound copy job. The client name is defined in the
backup application.
The time the job was queued.
The time the job started.
The time the job ended.
Description
The name of the item being copied to the inbound copy job. This name is
created by the backup application.
The status of the inbound copy job, which may be Queued, Paused, Running,
Cancelled, or Completed. If the status information displays —, no further
information is available.
NOTE: The backup application must be configured to tidy up any incomplete or
orphaned items before retrying the job.
The percentage of the copy job that has been completed.
The client that initiated the inbound copy job. The client name is defined in the
backup application.
Displays the IP address if the job was over Ethernet or the World Wide Port
Name/World Wide Node Name if the job was over Fibre Channel of the server
that created the item.
The name of the application that created the item.
Table Continued
StoreOnce Catalyst functions 113