Deleting A Storeonce Catalyst Store - HPE StoreOnce 6500 User Manual

a. Click Contract.
b. Deselect the service sets to remove from the Federation.
WARNING: To prevent data loss, ensure the "Number of Catalyst Items" (at the top of the
Stores page) is zero for the service set before removing it. Deleting a Federation member
containing items means those backups cannot be restored.
c. Click OK.
d. In the confirmation window, click Remove.
e. If the Federation member contains items, you get a second confirmation window; click Remove.
f. If the Federation member contains items, click Delete in the next two confirmation windows.
The service set is immediately removed from the Federation.
6. To forcibly delete a member from a Federated store:
a. Expand the Federated store.
b. Select the member from the Federation Member list.
c. Click Delete.
The service set is immediately removed from the Federation.
IMPORTANT: Deleting an individual Federation member will result in data loss. Only use this
option if data loss is not a concern. Hewlett Packard Enterprise recommends using the
Contract method instead.

Deleting a StoreOnce Catalyst Store

This procedure is the same for stores and for Federated stores.
Prerequisites
Only administrators can delete existing stores.
Procedure
1. Navigate to the StoreOnce > StoreOnce Catalyst > Stores > Catalyst Store Details tab.
2. Select the store to delete.
3. On the Catalyst Store Details tab, click Delete.
If any of the members are offline, you cannot delete a Federated store.
4. In the confirmation window, click Delete.
Deleting a StoreOnce Catalyst Store 99