Appliance Couplet Report; Capacity Threshold Alerts - HPE StoreOnce 6500 User Manual

Procedure
1. On the Reports page, select Appliance.
2. In the Groups menu, you will see all available appliance groups that have been registered for
reporting. Select All Appliances, or select an appliance group.
3. In the Appliance menu, select the specific appliance you want to run a report for.
4. Select the Capacity Forecasting button. You will see an alert that tells you it will take a few minutes to
fetch the data for this report. Click OK.
5. In the For Next menu, select the time frame you want the report to forecast for.
It can take a few minutes to generate the data. The resulting graph shows data points for the selected
time period, with date and time stamps on the x axis, and forecasted storage and disk used on the y
axis.
If the system is unable to create a forecast, a dialog box displays a message. If this occurs, try
changing your report parameters and running the report again.
You can export the graph; see Exporting Reporting Central reports on page 147 for details.

Appliance couplet report

To run this report, you must select a StoreOnce 6500 and 6600 appliance.
NOTE: Devices and service sets (nodes) in the Unknown state do not contribute to the file system usage
total, the bar graphs, or the deduplication ratio shown on this page. Devices in Fault or Failed to Start
states do contribute to these reported values.
To view the appliance couplet report:
Procedure
1. On the Reports page, select Appliance.
2. In the Groups menu, you will see all available appliance groups that have been registered for
reporting. Select All Appliances.
3. In the Appliance menu, select the specific appliance that contains a couplet that you want to run a
report for.
4. Select the devices you want to include in the report. The default (if you make no selection) includes all
devices. To select up to five specific devices, click Select Device, select the devices you want to
include, and click 'OK.
5. Select the Couplet button.
The resulting graph shows file system usage and the deduplication ratio for the selected couplet.
You can export the graph; see Exporting Reporting Central reports on page 147 for details.

Capacity Threshold Alerts

You can set capacity threshold alerts to receive an email when the capacity reaches a designated
percentage of physical capacity used. After the initial email, you will receive emails each time the capacity
used increases by 10%.
154 Appliance couplet report