Deleting Events From The Log; Exporting The Events Log; Remote Event Suppression - HPE StoreOnce 6500 User Manual

To View Acknowledged Events only
To view events that you have already acknowledged, use the Acknowledged Only filter when performing
an event search.

Deleting events from the log

This procedure allows you to delete all event logs except for Audit event logs. To manage Audit event
logs, see User Interface on page 172.
NOTE: It is sometimes necessary to reduce the size of the Events log before carrying out a software
update. Always refer to the update release notes to check the current recommendation.
Procedure
1. Click Delete at the top of the Events log.
2. Enter the number of days of events to keep.
3. Click OK.

Exporting the events log

Click Export at the top of the Events log to save a CSV file locally. The entire Events log is exported
regardless of what is currently displayed on the Events page.

Remote Event Suppression

Enable Remote Event Suppression mode to suppress the automated actions behind Remote Data
Collection events. When enabled, Remote Event Suppression flags all outbound event messages to let
the Hewlett Packard Enterprise support team that the system is undergoing some form of maintenance
that does not require a case to be raised with Hewlett Packard Enterprise support. For example, you
would enable Remote Data Collection Event Suppression when reconfiguring your network (in this
situation you would not require Remote Data Collection to raise a new case).
Remove Event Suppression Mode will be disabled automatically 24 hours after it was enabled or if the
entire cluster is restarted (if only part of the cluster is restarted, this mode will remain enabled).
To enable Remote Data Collection Event Suppression:
Procedure
1. From the Events page, click on the Settings tab.
2. In the Remote Event Suppression Mode pane, click Enable.
3. In the Enable Remote Event Suppression window, specify the reason to enable Remote Event
Suppression mode. The Reason field can only contain alphanumeric, dash, underscore, period, and
spaces.
4. Click OK.
5. Note that Remove Event Suppression Mode will be disabled automatically 24 hours after it was
enabled or if the entire cluster is restarted (if only part of the cluster is restarted, this mode will remain
enabled).
To disable Remote Data Collection Event Suppression:
Deleting events from the log 225